We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Viega ProPress 24020 bronze ball valve 1-1/2 inch press connections

Viega

Viega ProPress 24020 ball valve 1-1/2

SKU CH-MG88-YJE7N

A full-port bronze ball valve installs in seconds using flameless press technology and includes Smart Connect to identify unpressed joints during testing

  • Full-port design maintains maximum flow
  • Flameless press install removes soldering work
  • Smart Connect flags unpressed joints during test
  • Bronze body resists corrosion and fatigue
  • 1-1/2 inch ProPress valve ready to fit

Full-Port Bronze Ball Valve

The Viega ProPress 24020 is a full-port ball valve built from bronze, a material harder than brass that resists corrosion and metal fatigue better than steel. It is designed for installers who need reliable shut-off in plumbing systems without the time and fire risk of sweating copper joints.

Flameless Press Installation

This valve uses flameless press technology so connections are completed in seconds without an open flame, eliminating the need for solder, flux or a fire watch. The Viega Smart Connect feature identifies any unpressed connections during pressure testing, preventing leaks before the system goes live. It is not for installers who must use threaded or soldered fittings specified by local code.

1-1/2 Inch Press Connection

The valve has 1-1/2 inch press ends on both sides, so it only fits piping prepared for that exact connection size. Buyers working with different diameters or thread standards will need a different fitting.

Highlights

  • Full-port design maintains maximum flow
  • Flameless press install removes soldering work
  • Smart Connect flags unpressed joints during test
  • Bronze body resists corrosion and fatigue
  • 1-1/2 inch ProPress valve ready to fit

Specifications

BrandViega Propress

Questions about this item

How do I press the 24020 valve onto copper pipe without missing a connection?

Use a compatible press tool on each end; the Smart Connect feature will leak during pressure testing if any joint was not fully pressed.

What part of the 24020 valve will need replacement first in a hydronic system?

The bronze body resists corrosion and metal fatigue better than steel, so the press-seal O-rings are the typical wear item over time.

What pressure or temperature limit does the 24020 hit first under continuous operation?

The bronze construction handles higher pressure and temperature than brass or steel, so the system design pressure usually governs before the valve itself.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.