We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Viega MegaPressG carbon steel 90 degree elbow 3/4 inch press connections

Viega

Viega MegaPressG 6616 Carbon Steel Elbow 3/4 in

SKU CH-Z295-VT9QF

Carbon steel 90-degree press elbow for 3/4 in fuel gas piping rated to 125 psi from -40 to 180 °F

  • 90-degree elbow enables tight directional changes in gas piping
  • Carbon steel construction withstands 125 psi operating pressure
  • Press-to-press connection installs without threading or welding
  • Certified to ANSI LC4/CSA 6.32 for fuel gas distribution
  • Rated for -40 °F to 180 °F service temperature range

Viega MegaPressG 6616 Elbow 3/4 in

This 90-degree carbon steel elbow joins two 3/4-inch pipes using press-to-press connections. It is built for fuel-gas distribution systems that follow recognised industry codes. Professional installers and maintenance teams use it when a secure, flame-free joint is required.

Check pipe size and pressure rating before ordering

Verify that the existing line uses 3/4-inch tubing rated for at least 125 psi. Confirm the system operates between -40 and 180 degrees Fahrenheit. Ensure local codes accept ANSI LC4/CSA 6.32, IAPMO, ICC, IFGC, NFPA 54 and NFPA 58 compliance.

Replaces threaded or welded 3/4-in gas elbows

The press connection removes the need for threading equipment or hot-work permits on gas lines. The upgrade is worthwhile when faster installation, consistent joint quality and code-approved materials outweigh the cost of press tooling.

Highlights

  • 90-degree elbow enables tight directional changes in gas piping
  • Carbon steel construction withstands 125 psi operating pressure
  • Press-to-press connection installs without threading or welding
  • Certified to ANSI LC4/CSA 6.32 for fuel gas distribution
  • Rated for -40 °F to 180 °F service temperature range

Specifications

BrandViega

Questions about this item

Does the Viega MegaPressG 6616 elbow come with the press jaws or sealing rings, or must they be purchased separately?

The elbow is a press-to-press carbon steel fitting only. Press jaws, actuator tool and any required sealing rings are sold separately.

How do I choose between the available versions or capacities for this 3/4 in elbow?

This model is a single 90 degree elbow in 3/4 in size rated to 125 psi. No alternative capacities or versions are offered for this part number.

What does the 125 psi rating mean when the fitting is installed in a fuel gas line?

It is the maximum allowable working pressure for the fitting at temperatures between -40 and 180 degrees F, per ANSI LC4/CSA 6.32 and NFPA 54/58.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.