We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel press-fit tee fitting, three 1-inch connections

Viega

Viega MegaPress tee 95115 1" x 1" x 1" bath hardware

SKU CH-AKTX-D1P8B

A stainless-steel press-fit tee for non-potable water, rated to 200 psi and 250 °F

  • Press-fit connections speed installation without threading
  • Three 1 in ports join equal-size pipe runs
  • 304 stainless steel resists corrosion in non-potable systems
  • FKM O-rings seal to 200 psi and 250 °F
  • Compact 5 5/32 in length fits tight spaces

Viega MegaPress tee 1" stainless

The Viega MegaPress tee is a crimp-style press-fit fitting made from 304-grade stainless steel with FKM O-rings. It joins three 1-inch pipes in a tee configuration for non-potable water systems. The fitting handles up to 200 psi and 250 degrees Fahrenheit. Model 95115 is supplied new and ready for installation.

Verify pipe size and press tool compatibility

Confirm that all three pipe runs measure exactly 1 inch and are approved for press-fit connections. The system must operate within the 200 psi and 250 degree Fahrenheit limits of this fitting. Ensure your press tool and jaw set are rated for 304 stainless MegaPress profiles. This fitting is not intended for potable water applications.

FKM O-ring seals and stainless construction

The factory-fitted FKM O-rings provide the seal at each press connection without separate thread tape or solder. Grade 304 stainless steel resists corrosion in typical non-potable water environments. No additional sealing compounds or gaskets are supplied with the fitting. The 5 5/32 inch overall length is fixed by the pressed joints.

Highlights

  • Press-fit connections speed installation without threading
  • Three 1 in ports join equal-size pipe runs
  • 304 stainless steel resists corrosion in non-potable systems
  • FKM O-rings seal to 200 psi and 250 °F
  • Compact 5 5/32 in length fits tight spaces

Specifications

BrandViega Megapress Stainless 304

Questions about this item

Does the 95115 tee come with the three FKM O-rings already seated in the press-fit ends or do I need to buy them separately?

The FKM O-rings are factory-installed in each of the three 1-inch press-fit sockets, so no separate ring kit is required.

Why would I choose the 304-grade stainless version instead of a carbon-steel MegaPress tee?

Grade 304 stainless resists corrosion in non-potable water systems where carbon steel would degrade, while still handling 200 psi at 250 °F.

What does the 200 psi rating mean when the tee is pressed onto 1-inch stainless pipe in a hydronic loop?

It guarantees the joint will hold 200 psi continuously at up to 250 °F without leaking or blowing off the pipe.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.