Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00938716BTC
In stock
Viega
Viega MegaPress tee 3/4" x 3/4" x 1/2" bathware
A zinc nickel-plated steel reducing tee with press-fit connections for 3/4 in, 3/4 in and 1/2 in pipe, rated to 200 psi
- TypeTraffic & Parking Lot
- Press-fit connections install without welding or threading
- Steel body with zinc-nickel plating resists corrosion in air and non-potable water
- EPDM O-ring seals at up to 200 psi working pressure
- Reducing tee joins 3/4 in, 3/4 in and 1/2 in press-fit lines
- Overall length 4 17/32 in fits tight mechanical spaces
Press-Fit Reducing Tee for 3/4" and 1/2" Pipe
The Viega MegaPress tee joins three steel pipes using press-fit connections on every branch. It carries air or non-potable water at up to 200 psi and has an overall length of 4 17/32 in. The EPDM O-rings and zinc nickel-plated finish complete the factory-sealed joint.
Suited for Steel Press Systems.
Installers who work with the MegaPress steel range and need a reducing branch will use this fitting. It does not fit copper tube sizes, PEX, CPVC or threaded pipe, so projects requiring those materials need a different fitting.
Branch Size Decides the Fit
The critical dimension is the 1/2 in press-fit outlet on the reducing leg. If the branch line is 1/2 in MegaPress steel, this tee matches; if the branch is any other size or material, the fitting cannot be used.
Highlights
- Press-fit connections install without welding or threading
- Steel body with zinc-nickel plating resists corrosion in air and non-potable water
- EPDM O-ring seals at up to 200 psi working pressure
- Reducing tee joins 3/4 in, 3/4 in and 1/2 in press-fit lines
- Overall length 4 17/32 in fits tight mechanical spaces
Specifications
| Brand | VIEGA PROPRESS XL |
|---|---|
| Type | Traffic & Parking Lot |
Questions about this item
Which MegaPress tee size should I choose for a 3/4 in main line with a 1/2 in branch?
The 25330 model has 3/4 in press-fit ends on the run and a 1/2 in press-fit outlet, matching that exact reduction.
What does the 200 psi rating mean once the tee is installed in my system?
It is the maximum operating pressure the steel body and EPDM seals are designed to hold continuously in air or non-potable water service.
How does the press-fit connection standard limit what pipe I can use?
Each end requires compatible press-fit steel pipe and the correct Viega press tool; the joint cannot be threaded, soldered or used with other pipe materials.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
