We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel 45 degree press-fit elbow 3/4 inch Viega 90060

Viega

Viega Megapress Stainless 316 45 Degree Elbow 3/4" 90060

SKU CH-ES8A-WHKM9

Press-fit stainless steel 316 elbow joins 3/4 in tubing at 45 degrees, rated 200 psi and 250 °F for potable water

  • 45-degree elbow routes pipe around obstacles with a smooth press-fit connection
  • 316 stainless steel body resists corrosion in potable water systems
  • EPDM O-ring seals reliably at up to 200 psi operating pressure
  • Rated for continuous service at temperatures up to 250 °F
  • Press-fit ends on both sides install quickly without threading or welding

Viega Megapress 316 45° Elbow 3/4

The Viega Megapress Stainless 316 45 Degree Elbow joins two 3/4 inch tubes with press-fit connections on both ends. It is designed for potable water systems where corrosion resistance and reliable joints are required. Installers who prefer a flame-free crimp method will find this fitting suited to their workflow. The 316 grade stainless body and EPDM o-ring provide compatibility with treated water supplies.

Thermal and pressure limits in service

The fitting withstands a maximum operating pressure of 200 psi and a maximum operating temperature of 250 Degrees F. These ratings cover typical hot and cold water distribution without additional derating. No moving parts or seals beyond the factory o-ring mean there is no noise generated during flow. Power draw is not applicable to this passive component.

Build quality and daily installation implications

The 316 stainless construction resists scaling and chemical attack better than lower grades, reducing long-term maintenance. Press-fit ends eliminate threading or soldering, cutting install time and removing open-flame permits on site. The 45 degree sweep eases routing around obstacles while keeping pressure drop low. No bolt holes or flanges are present, so the fitting sits inline without extra hardware.

Highlights

  • 45-degree elbow routes pipe around obstacles with a smooth press-fit connection
  • 316 stainless steel body resists corrosion in potable water systems
  • EPDM O-ring seals reliably at up to 200 psi operating pressure
  • Rated for continuous service at temperatures up to 250 °F
  • Press-fit ends on both sides install quickly without threading or welding

Specifications

BrandViega Megapress Stainless 316

Questions about this item

How do I install the 45 degree elbow and what step is often missed?

Cut the tube square, deburr the edge, mark the insertion depth, then press with a calibrated Megapress jaw; the step often missed is verifying the depth mark after pressing.

What maintenance or replacement will the 316 stainless 45 degree elbow need later?

The EPDM O-ring is the only wear item; inspect it during system checks and replace if it shows cracking or compression set.

What limit appears first on the 3/4 inch press-fit elbow under sustained use?

The 200 psi maximum operating pressure is reached before the 250 degree F temperature limit in most hot-water recirculation loops.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.