We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Zinc nickel-plated steel reducing tee with press-fit and FPT ends

Viega

Viega MegaPress Reducing Tee 1-1/4 x 3/4 in 25505

SKU CH-QJ31-CT6DB

Connects 1-1/4 inch and 3/4 inch pipes in air and non-potable water systems with press-fit and threaded ends, rated to 200 psi

  • Press-fit connections speed installation without threading
  • EPDM O-ring seals air and non-potable water at 200 psi
  • Zinc nickel-plated steel resists corrosion in harsh environments
  • Reducing tee joins 1-1/4 in and 3/4 in lines in one fitting
  • 6 15/32 in overall length fits tight mechanical spaces

Press-Fit Reducing Tee

The Viega MegaPress 25505 is a steel reducing tee for air and non-potable water systems. It joins two 1-1/4 in press-fit branches with a 3/4 in female pipe thread outlet. An EPDM O-ring seals each press connection without soldering or threading the main runs.

Zinc Nickel-Plated Finish

The zinc nickel coating protects the steel body against corrosion in compressed-air and non-potable water service. EPDM O-ring material resists ageing from oil carry-over and temperature cycling. The pressed joints eliminate flux residue and open-flame permits on site.

200 psi Rated Connection

Rated to 200 psi maximum operating pressure, the fitting measures 6 15/32 in overall length. Press-fit ends require a compatible press tool and jaw set for 1-1/4 in tubing. The FPT branch accepts standard 3/4 in male pipe threads for valves, drops or instruments.

Highlights

  • Press-fit connections speed installation without threading
  • EPDM O-ring seals air and non-potable water at 200 psi
  • Zinc nickel-plated steel resists corrosion in harsh environments
  • Reducing tee joins 1-1/4 in and 3/4 in lines in one fitting
  • 6 15/32 in overall length fits tight mechanical spaces

Specifications

BrandVIEGA

Questions about this item

How often does the EPDM O-ring need replacement in a 200 psi air system?

The EPDM O-ring is designed for long service life; replacement intervals depend on cycle frequency and fluid compatibility rather than a fixed schedule.

What pressure limit is reached first during continuous 200 psi operation?

The maximum operating pressure is 200 psi, so the pressure rating itself is the limiting factor under sustained use.

Does the zinc nickel-plated steel body run hot when pressurised all day?

The steel body with zinc nickel plating does not generate heat; it simply contains the pressurised fluid at ambient temperature.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.