We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Zinc nickel-plated steel 45-degree street elbow press fitting 3/4 in

Viega

Viega MegaPress 45 street elbow 3/4 in 26105

SKU CH-TZ94-TEGCT

Connects 3/4 inch steel pipe at a 45-degree angle with press-fit and FTG ends, rated for 200 psi and 250 Degrees F

  • TypeTraffic & Parking Lot
  • 45° street elbow routes piping around tight corners
  • Press-fit connection installs without threading or soldering
  • Zinc nickel-plated steel resists corrosion in non-potable systems
  • EPDM O-ring seals to 200 psi working pressure
  • Rated for continuous service up to 250 °F

45-degree steel street elbow

This 45-degree street elbow connects 3/4-inch press-fit piping to a 3/4-inch copper tube size fitting end. It is designed for non-potable water applications using steel construction with a zinc nickel-plated finish. The EPDM O-ring provides the seal for press-fit installation. This fitting suits installers working with MegaPress compatible systems.

Press-fit to FTG transition

The press-fit connection on side A eliminates the need for threading or welding equipment at that joint. Side B uses an FTG connection for 3/4-inch copper tube size, allowing direct insertion into a compatible fitting body. This combination frees up installation time by using a press tool on one end only. It fits into layouts requiring a 45-degree directional change.

Rated for 200 psi and 250 °F

Normal operating pressure reaches up to 200 psi with a maximum temperature of 250 degrees Fahrenheit. The steel body and zinc nickel coating handle these conditions without additional thermal shielding. No moving parts mean silent operation under flow. The EPDM seal maintains integrity within the stated pressure and temperature range.

Highlights

  • 45° street elbow routes piping around tight corners
  • Press-fit connection installs without threading or soldering
  • Zinc nickel-plated steel resists corrosion in non-potable systems
  • EPDM O-ring seals to 200 psi working pressure
  • Rated for continuous service up to 250 °F

Specifications

BrandVIEGA PROPRESS XL
TypeTraffic & Parking Lot

Questions about this item

Will the 200 psi pressure rating hold under sustained use?

The fitting is rated for a maximum operating pressure of 200 psi.

Does the zinc nickel-plated finish and EPDM O-ring handle continuous 250 °F water without leaking?

The maximum operating temperature is 250 °F with an EPDM O-ring and zinc nickel-plated steel body.

Do I need a Viega press tool and 3/4 in copper tubing to install this 45 degree street elbow?

It requires a press-fit connection on the 3/4 in pipe side and an FTG connection on the 3/4 in copper tube side.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.