Viega
Viega MegaPress 316 Tee 1" x 1" x 3/4" 90195
Stainless steel 316 tee provides a secure, flameless press connection for 1" x 1" x 3/4" tubing in potable water and corrosive chemical systems
- Flameless installation avoids hot-work permits and fire risk
- Stainless 316 resists corrosion from chemicals and potable water
- Press connection keeps full pipe wall strength without threading
- One fitting joins 1", 1" and 3/4" tubes in a single step
- Suits commercial potable water and industrial chemical lines
Stainless-Steel Press Tee for Clean Connections
The Viega MegaPress 316 tee joins 1" and 3/4" tube sizes without threading or open flame, preserving the full pipe wall. It creates a secure, repeatable joint that resists high temperatures, pressure and corrosive cleaning agents, making it suitable for potable-water and industrial-chemical lines.
Reducing Branch Determines Fit
The branch outlet measures 3/4" while both run ends measure 1", so the tee only matches systems that require exactly this reduction. Installers must verify that the piping schedule calls for a 1" x 1" x 3/4" configuration before pressing.
Press Tool Required for Installation
A compatible MegaPress jaw set and press tool are needed to complete each connection; no solder, flux or thread sealant is used. The most common error is pressing with mismatched jaws or skipping the depth-mark check, either of which can leave the joint unsealed.
Highlights
- Flameless installation avoids hot-work permits and fire risk
- Stainless 316 resists corrosion from chemicals and potable water
- Press connection keeps full pipe wall strength without threading
- One fitting joins 1", 1" and 3/4" tubes in a single step
- Suits commercial potable water and industrial chemical lines
Specifications
| Brand | Viega Megapress Stainless 316 |
|---|
Questions about this item
What does the 316 grade mean for corrosion resistance in a real installation?
The 316 stainless steel resists chlorides and many chemicals, so the tee holds up in potable-water lines and harsher industrial fluids without pitting.
What connection standard does the MegaPress system use and what does it eliminate?
It uses a press-fit joint that removes the need for threading, preserving the full pipe wall and creating a flameless, consistent seal.
What tube sizes must the piping match for this tee to fit?
The run ports require 1-inch tube and the branch requires 3/4-inch tube for a proper press connection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Scosche
Scosche 8" PRO Midbass Driver 200W RMS 400W Peak 60-8000Hz 97dB 4Ω 3.75" Depth
$9.99
0.00011958BTC
In stock