We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Viega MegaPress 90 degree street elbow carbon steel press fitting 1-1/4 inch

Viega

Viega MegaPress 26065 90 street elbow coupling 1-1/4" x 1-1/4

SKU CH-A713-KVMXR

A 90-degree carbon-steel street elbow with press-to-street connections for 1-1/4 inch pipe, rated to 200 psi and 250 °F

  • 90-degree turn in tight spaces with press-to-street design
  • Carbon steel construction handles 200 psi system pressure
  • Rated for temperatures up to 250 degrees Fahrenheit
  • 1-1/4 inch press and street ends match same-size pipe
  • Viega MegaPress model 26065 ensures press-system compatibility

90 Degree Street Elbow for Press Systems

This carbon steel 90 degree street elbow connects 1-1/4 inch pipe using a press-to-street configuration. It suits installers working on hydronic heating, compressed air or non-potable water lines where Viega MegaPress press fittings are specified. The fitting is new and rated for a maximum pressure of 200 psi.

Installation uses standard press tools

Press the fitting onto prepared pipe with a compatible MegaPress jaw set; no threading, welding or soldering is required. Ensure the pipe is cut square, deburred and marked to the correct insertion depth before pressing. The street end accepts a female-threaded component, so verify thread compatibility and sealant choice for the mating part. The fitting is restricted from sale in certain states; confirm local code acceptance before starting the job.

Rated for 200 psi and 250 °F

The elbow handles typical hydronic and compressed-air pressures up to 200 psi with a temperature range from 0 to 250 degrees Fahrenheit. It provides a secure 90 degree turn in 1-1/4 inch piping without the need for separate street elbows and couplings. Systems operating above 200 psi or beyond 250 °F will exceed the fitting's rated limits.

Highlights

  • 90-degree turn in tight spaces with press-to-street design
  • Carbon steel construction handles 200 psi system pressure
  • Rated for temperatures up to 250 degrees Fahrenheit
  • 1-1/4 inch press and street ends match same-size pipe
  • Viega MegaPress model 26065 ensures press-system compatibility

Specifications

BrandVIEGA MEGAPRESS

Questions about this item

How can I verify the Viega MegaPress 26065 elbow is seated correctly after pressing?

A properly pressed joint shows the tool's indicator mark aligned on the fitting bead and no visible gap between the pipe end and the fitting stop.

What comes with the 26065 street elbow and what must I supply?

The fitting includes the carbon-steel body with integrated sealing elements; you must provide compatible 1-1/4 in pipe and a MegaPress press tool with the correct jaw set.

Which version of the MegaPress 90° street elbow should I select for a 200 psi, 250 °F hydronic system?

The 26065 model is rated for 200 psi and a temperature range up to 250 °F, matching those operating conditions directly.

More in Fittings & Couplings

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.