We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless 304 press-fit straight adapter with FNPT end, brushed metallic finish

Viega

Viega 95265 Stainless 304 Press-fit 3/4 in FNPT 3/4 in Straight Adapter

SKU CH-EBHK-7FVGW

A stainless steel 304 press-fit to FNPT straight adapter for 3/4 inch non-potable water lines rated to 200 psi and 250 degrees F

  • Press-fit connection installs without threading tools
  • Stainless steel 304 resists corrosion in non-potable water
  • FNPT female thread mates with standard 3/4 in pipe
  • Rated 200 psi at 250 Degrees F for demanding systems
  • FKM O-ring seals reliably across wide temperature range

Straight Adapter for Stainless Systems

The Viega 95265 adapter joins 3/4 in press-fit tubing to a 3/4 in FNPT thread in a straight run. Made from 304 stainless steel, it suits non-potable water lines where corrosion resistance matters. Installers working with press tools can make a permanent joint without threading or soldering pipe.

Press-Fit Seal and FKM O-Ring

A factory-fitted FKM O-ring seats inside the press end, creating a leak-tight seal when the tool compresses the fitting. The straight body adds 2 15/32 in overall length and introduces no directional change, keeping runs simple in tight mechanical rooms. Rated to 200 psi and 250 degrees F for continuous service.

No Extra Components Required

The fitting ships as a single piece with the O-ring already installed, so no separate gaskets, sealant or bolts are needed. Pressing completes the connection in seconds, reducing labour compared to threaded or flanged alternatives. The 304 grade holds up in typical hydronic and chilled-water environments.

Highlights

  • Press-fit connection installs without threading tools
  • Stainless steel 304 resists corrosion in non-potable water
  • FNPT female thread mates with standard 3/4 in pipe
  • Rated 200 psi at 250 Degrees F for demanding systems
  • FKM O-ring seals reliably across wide temperature range

Specifications

BrandViega Megapress Stainless 304

Questions about this item

What does the 200 psi pressure rating mean for a press-fit 3/4 in stainless 304 adapter?

The 200 psi maximum operating pressure is the design limit for non-potable water systems when the press connection is made with the correct Viega jaw profile and the FKM O-ring seats fully.

What pipe and clearance dimensions does the 2 15/32 in overall length require?

The straight adapter measures 2 15/32 in end-to-end; allow enough straight run on the 3/4 in pipe for the press tool jaws to close completely and thread engagement on the FNPT side.

How do you press the 3/4 in connection without damaging the FKM O-ring?

Square-cut the pipe, deburr inside and out, mark the insertion depth, push the fitting to the mark, then press with a calibrated Viega MegaPress jaw — do not lubricate the O-ring.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.