Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00945086BTC
In stock
Viega
Viega 95105 MegaPress tee 1/2 in press-fit bath hardware
Stainless steel press-fit tee joins three 1/2 in pipes for non-potable water at 200 psi and 250 °F
- Press-fit connections install quickly without soldering
- Stainless steel 304 resists corrosion in non-potable systems
- FKM O-ring seals up to 200 psi and 250 °F
- Tee layout splits flow evenly across three 1/2 in ports
- Compact 4 3/32 in length fits tight piping runs
Viega MegaPress Stainless Tee
The Viega 95105 MegaPress tee is a press-fit fitting made from 304 stainless steel for non-potable water systems. It connects three 1/2 in pipes with press-fit ends on every port. FKM O-rings seal each joint without threading or soldering. The fitting handles up to 200 psi at 250 degrees F.
Not for Potable or Larger Lines
This tee is not for potable water installations or for pipes larger than 1/2 in. It also does not suit systems that exceed the 200 psi or 250 degrees F ratings. Installers needing threaded, soldered or push-fit connections should choose a different fitting style.
304 Stainless Steel with FKM Seals
The fitting body is grade 304 stainless steel and uses FKM O-ring material at every press-fit port. This combination determines chemical compatibility and temperature resistance for the application. Verify that the fluid and service conditions match these materials before specifying the part.
Highlights
- Press-fit connections install quickly without soldering
- Stainless steel 304 resists corrosion in non-potable systems
- FKM O-ring seals up to 200 psi and 250 °F
- Tee layout splits flow evenly across three 1/2 in ports
- Compact 4 3/32 in length fits tight piping runs
Specifications
| Brand | Viega Megapress Stainless 304 |
|---|
Questions about this item
What pipe size must I already have for the 1/2 in press-fit connections on this tee?
Each of the three ports is sized for 1/2 in pipe, so your existing runs need to be 1/2 in to press directly onto the fitting.
Will the FKM O-ring material hold up against the 250 Degrees F maximum temperature if I keep my older hot-water loop?
FKM is rated for continuous service at 250 Degrees F, matching the tee's maximum operating temperature, so the seals remain reliable on legacy high-temperature lines.
How can I verify the joint is sound after pressing the 1/2 in MegaPress tee?
Pressurise the system up to 200 psi and inspect all three press-fit connections for leaks; a dry joint at test pressure confirms the crimp is correct.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
