Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00941744BTC
In stock
Viega
Viega 90315 MegaPress coupling 3/4 in bath hardware
Connects two 3/4 in pipes with a press-fit stainless steel coupling rated to 200 psi
- Press-fit installation saves time on potable water lines
- 316 stainless steel body resists corrosion in plumbing systems
- EPDM O-ring seals up to 200 psi operating pressure
- Straight 3/4 in connector joins equal pipe sizes directly
- No-stop design allows full pipe insertion for secure crimp
Stainless 316 press-fit coupling
The Viega 90315 MegaPress coupling joins two 3/4 in pipes with press-fit connections on both ends. Made from grade 316 stainless steel with an EPDM O-ring, it is rated for potable water at up to 200 psi. The straight connector measures 2 15/16 in overall length and has no stop.
Verify pipe material and press tool access
Confirm the existing pipe is compatible with press-fit stainless fittings and sized at 3/4 in outer diameter. Ensure a suitable press tool and jaw set for 3/4 in stainless press systems is available on site. Check that local codes accept press connections for potable water and that no threading or soldering adapters are required.
Replaces threaded or soldered 3/4 in couplings
This fitting replaces traditional threaded or soldered straight couplings in 3/4 in potable water lines. The jump is worth it when faster, flameless installation is preferred and the system pressure stays within 200 psi. It is not for applications needing a stop feature, flange mounting, or bolt-hole alignment.
Highlights
- Press-fit installation saves time on potable water lines
- 316 stainless steel body resists corrosion in plumbing systems
- EPDM O-ring seals up to 200 psi operating pressure
- Straight 3/4 in connector joins equal pipe sizes directly
- No-stop design allows full pipe insertion for secure crimp
Specifications
| Brand | Viega Megapress Stainless 316 |
|---|
Questions about this item
What is included with the Viega 90315 MegaPress coupling and do I need any extra parts?
The box contains the straight press-fit coupling with its EPDM O-rings already fitted. You will need a compatible press tool and stainless-steel tubing cut to 3/4 in outer diameter.
How do I choose the right version of this 3/4 in coupling for my job?
This single model 90315 is a no-stop straight connector in 316 stainless rated to 200 psi; select it when you need a direct press-fit joint between two 3/4 in tubes.
What does the 200 psi rating mean once the coupling is installed in a potable-water system?
It confirms the joint will hold up to 200 psi working pressure in hot or cold potable water when pressed correctly with the proper tool.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
