We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Viega ProPress stainless steel tee fitting 1 inch by 1 inch by half inch press connections

Viega

Viega 85642 ProPress tee 1" x 1" x 1/2

SKU CH-1C25-W2BD1

Stainless-steel press tee joins 1 in, 1 in and 1/2 in tubes at 200 psi up to 284 °F

  • Press-fit tee installs without solder or thread
  • 304 stainless steel resists corrosion in water systems
  • Rated for 200 psi working pressure
  • Operates from 0 to 284 degrees Fahrenheit
  • 1 inch by 1 inch by 1/2 inch branch reduces pipe size

Press tee for copper piping

The Viega 85642 ProPress tee joins three press-fit connections in a single 304 stainless steel body. It is built for installers who need a flame-free joint on potable water or hydronic lines.

Suits new installs and repairs on 1" and 1/2" tube

This fitting matches the listed tube sizes and 200 psi rating. It does not serve threads, flanges or larger diameters, so buyers needing those connections must choose a different fitting.

Press tool completes the joint without solder

The three press ends seal when crimped with a compatible press tool, removing the need for open flame, flux or solder. The 304 stainless construction handles temperatures up to 284 Degrees F within the stated pressure limit.

Highlights

  • Press-fit tee installs without solder or thread
  • 304 stainless steel resists corrosion in water systems
  • Rated for 200 psi working pressure
  • Operates from 0 to 284 degrees Fahrenheit
  • 1 inch by 1 inch by 1/2 inch branch reduces pipe size

Specifications

BrandViega Propress Stainless 304

Questions about this item

What press tool and jaw size are required to install the 1" and 1/2" connections on this Viega 85642 tee?

You need a compatible press tool with 1" and 1/2" jaw sets to press the stainless-steel ends onto the tubing.

Can the 1/2" branch on this tee connect to existing copper pipe that is already in place?

Yes, if the existing copper is 1/2" nominal and you use a ProPress copper adapter, the press connection will seal without soldering.

How can I confirm the joint is leak-free after pressing the tee into the system?

Pressurise the line up to 200 psi and inspect each press connection; no water should appear at the 304 stainless sealing rings.

More in Fittings & Couplings

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.