We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper press-fit coupling with centre stop, straight form, metallic finish

Viega

Viega 2915 Copper Press-Fit Coupling With Stop 1-1/2 in

SKU CH-5CFR-0MBSA

Connects two 1-1/2 in copper tubes with a press-fit joint rated to 200 psi

  • Item Count1
  • Press-fit copper coupling installs without soldering or flame
  • EPDM O-ring seals potable water lines up to 200 psi
  • Built-in centre stop dimple ensures consistent insertion depth
  • Straight 1-1/2 in copper-to-copper joint for simple repairs
  • Viega ProPress 2915 model built for professional plumbing systems

Copper Press-Fit Coupling With Stop

The Viega 2915 is a straight copper coupling designed for press-fit connections on 1-1/2 inch tubing. It features an integrated center stop dimple to ensure proper insertion depth during installation. The fitting carries a maximum operating pressure rating of 200 psi for potable water applications.

Suited For Press-Fit Copper Systems

This coupling suits installers working with Viega ProPress compatible tools on copper piping systems. It is not intended for threaded, soldered, or push-fit connection methods. Buyers needing a fitting without an internal stop, or those working with different tube diameters or materials, should look at alternative fitting types.

Holds 200 psi Under Sustained Pressure

The coupling maintains its seal at the rated 200 psi maximum operating pressure during continuous service. The EPDM O-ring material resists degradation from potable water exposure over time. The press-fit joint integrity relies on correct tool calibration and the center stop ensuring consistent insertion depth.

Highlights

  • Press-fit copper coupling installs without soldering or flame
  • EPDM O-ring seals potable water lines up to 200 psi
  • Built-in centre stop dimple ensures consistent insertion depth
  • Straight 1-1/2 in copper-to-copper joint for simple repairs
  • Viega ProPress 2915 model built for professional plumbing systems

Specifications

Item Count1
BrandViega

Questions about this item

What press tool and jaw size do I need to install the 1-1/2 in Viega ProPress 2915 coupling?

A Viega ProPress-compatible press tool fitted with a 1-1/2 in copper jaw set is required to form the press-fit connections on both ends of the coupling.

Can I join this coupling to existing 1-1/2 in copper tube that was previously soldered?

Yes, the press-fit ends accept standard 1-1/2 in copper tube size, so the coupling connects directly to legacy soldered copper of the same diameter.

How do I verify the joint is leak-tight after pressing the coupling?

Pressurise the system up to the 200 psi rating and inspect each pressed joint for water escape; a dry joint at test pressure confirms a proper seal.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.