We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass ProPress ball valve with lever handle

Viega

Viega 24015 ProPress ball valve 1-1/4" x 1-1/4" bathware

SKU CH-TGFB-VVA4J

Manual two-way brass and bronze ball valve for water with a full-port design and 200 psi operating pressure

  • TypeOther
  • Full-port design maintains unrestricted water flow
  • Chrome-plated brass ball resists corrosion for long service
  • Brass and bronze body handles 200 psi working pressure
  • Non-locking handle allows quick manual operation
  • Three-piece construction simplifies in-line maintenance

Valve construction and materials

The Viega ProPress ball valve uses a three-piece brass and bronze body with a chrome-plated brass ball. A full-port design keeps the flow path unrestricted. It is a manual two-way valve intended for water service.

Pressure limits and headroom

The valve is rated for 200 psi maximum operating pressure and a vacuum service rating of 29.2 in Hg. Steam and combustible gas pressures are not rated. These limits define the headroom for typical domestic water systems.

Installation fit and restrictions

ProPress ends allow a press-tool connection without threading or soldering. The straight body style fits inline on 1-1/4 inch nominal piping. No state sales restrictions apply to this item.

Highlights

  • Full-port design maintains unrestricted water flow
  • Chrome-plated brass ball resists corrosion for long service
  • Brass and bronze body handles 200 psi working pressure
  • Non-locking handle allows quick manual operation
  • Three-piece construction simplifies in-line maintenance

Specifications

BrandVIEGA
TypeOther

Questions about this item

Will the 200 psi ProPress valve connect directly to my existing 1-1/4" copper supply lines?

Yes, the ProPress ends are made for 1-1/4" copper tube; press them with the correct jaw and the three-piece brass body joins your current piping without threading or soldering.

How can I verify the 29.2 in Hg vacuum rating is holding after installation?

Apply a vacuum pump, watch the gauge settle at 29.2 in Hg, close the valve and confirm the reading remains steady — no decay means the chrome-plated ball and seals are seating properly.

Does the box include press jaws or only the valve body?

Only the valve body with its non-locking handle is supplied; the ProPress jaws and pressing tool must be purchased or rented separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.