We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper reducing tee with three press-fit connections, 2-1/2 by 2 by 2 inches, silver metal finish

Viega

Viega 22278 ProPress XL reducing tee 2-1/2 x 2 x 2 bathware

SKU CH-CPVA-J0SV4

Copper reducing tee joins 2-1/2, 2 and 2 inch tubes with press-fit connections for potable water at 200 psi

  • TypeOther
  • Press-fit connections install quickly without soldering
  • Reducing tee joins 2-1/2 in, 2 in and 2 in copper tube sizes
  • Copper body with EPDM O-ring suits potable water systems
  • Rated for 200 psi maximum operating pressure
  • Centre-stop dimple ensures correct tube insertion depth

ProPress XL reducing tee for copper pipe

The Viega 22278 ProPress XL reducing tee joins three copper tube sections in a single press-fit fitting. It connects a 2-1/2 inch main line to two 2 inch branches for potable water systems. Installers use it when a supply run splits to smaller distribution lines.

Press-fit connection with EPDM seal

Each port uses a press-fit design that eliminates soldering, flux and open flame on the job site. The factory-fitted EPDM O-ring provides the watertight seal when the fitting is pressed with a compatible tool. A centre-stop dimple ensures the tube is fully inserted before pressing.

Rated for 200 psi working pressure

The copper body is rated to a maximum operating pressure of 200 psi in potable water applications. This pressure rating determines whether the fitting meets the design requirements of the specific plumbing system. Systems exceeding this pressure require a different fitting class.

Highlights

  • Press-fit connections install quickly without soldering
  • Reducing tee joins 2-1/2 in, 2 in and 2 in copper tube sizes
  • Copper body with EPDM O-ring suits potable water systems
  • Rated for 200 psi maximum operating pressure
  • Centre-stop dimple ensures correct tube insertion depth

Specifications

BrandVIEGA PROPRESS XL-C
TypeOther

Questions about this item

Does the EPDM O-ring on the 22278 need periodic replacement?

The EPDM O-ring is designed for the fitting's service life and does not require scheduled replacement under normal potable-water conditions.

What pressure limit governs continuous operation of this reducing tee?

The maximum operating pressure is 200 psi, which is the primary limit during sustained use.

How much heat does the copper body add to the water during all-day flow?

Copper conducts heat but the fitting itself generates none; any temperature change comes from the surrounding environment, not the tee.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.