We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper press-fit reducing tee with three connections

Viega

Viega 15493 Copper Press-Fit Reducing Tee 1/2 1/2 1

SKU CH-1DAH-KH43E

Reducing tee joins 1/2 in and 1 in copper tubes with press-fit connections and EPDM seals for potable water systems

  • Reduces flow from 1 in to 1/2 in branches
  • Press-fit copper ends install without soldering
  • EPDM O-ring seals up to 200 psi
  • Centre-stop dimple ensures correct insertion depth
  • Ready for potable water systems

Viega Copper Press-Fit Reducing Tee

This Viega copper reducing tee connects three press-fit joints in potable-water systems. Side A and Side B accept 1/2 inch copper tube while Side C steps up to 1 inch. A centre stop dimple ensures correct insertion depth during pressing.

Practical limits of the press-fit interface

The fitting is rated for a maximum operating pressure of 200 psi. All three ports use EPDM O-rings for the seal. Installation requires a compatible press tool and jaws; the joint cannot be soldered or threaded once pressed.

What this replaces and when the jump is worth it

It replaces a soldered copper tee with a reducer when a press system is already specified on site. The jump is worth it where open flame is prohibited, where pressing is faster than soldering multiple joints, or where the installer prefers a mechanical connection with a visible press indicator.

Highlights

  • Reduces flow from 1 in to 1/2 in branches
  • Press-fit copper ends install without soldering
  • EPDM O-ring seals up to 200 psi
  • Centre-stop dimple ensures correct insertion depth
  • Ready for potable water systems

Specifications

BrandVIEGA

Questions about this item

Which reducing tee should I choose for a 1/2", 1/2", 1" copper press-fit connection?

The Viega 15493 is a copper press-fit reducing tee with ends sized 1/2 in, 1/2 in and 1 in, matching that exact combination.

What does the 200 psi rating mean when the tee is installed in a potable water system?

It indicates the maximum operating pressure the fitting is designed to handle once pressed onto copper tube in a potable water application.

How does the EPDM O-ring and press-fit interface limit what the fitting can do?

The EPDM O-ring seals on copper tube sizes 1/2 in and 1 in, and the press-fit connection is rated for up to 200 psi in potable water systems.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.