VIDIKRON
VIDIKRON Vision Model 65 Projector Lamp 200W
A 200 W UHP replacement lamp module with housing, rated for 2,000 to 3,000 hours of use
- TypeUHP
- Wattage200W
- Lamp Life2,000 (Normal) - 3,000 (Economy) Hrs.
- Ready-to-install module with Philips 200W UHP bulb
- 2,000 hours normal or 3,000 hours economy lamp life
- OEM-quality assembly built to ISO9001 standards
- Tested for beam performance, ignition, voltage and run-time
- Direct-fit replacement for Vidikron Vision Model 65
Replacement Lamp for Vision Model 65
This lamp module fits the Vidikron Vision Model 65 projector. It ships as a complete assembly with the bulb already seated in its housing so the installer can swap it without handling the bare lamp. The unit is new and built to ISO 9001 quality standards using genuine Philips UHP components.
200W UHP Output and Rated Life
The Philips UHP bulb draws 200W and is rated for 2,000 hours in normal mode or 3,000 hours in economy mode. Brightness will gradually decline as those limits approach and colour uniformity may shift near end of life. The lamp is not suited for users who need longer intervals between replacements or higher lumen output than a 200W UHP design can deliver.
Projector-Specific Compatibility Limits
The module is engineered only for the Vision Model 65 and will not strike in other projectors even if the connector appears similar. Buyers who need a lamp for a different Vidikron model or a third-party projector must source the correct part number. No adapters or firmware updates can extend compatibility beyond the designated unit.
Highlights
- Ready-to-install module with Philips 200W UHP bulb
- 2,000 hours normal or 3,000 hours economy lamp life
- OEM-quality assembly built to ISO9001 standards
- Tested for beam performance, ignition, voltage and run-time
- Direct-fit replacement for Vidikron Vision Model 65
Specifications
| Brand | Vidikron |
|---|---|
| Type | UHP |
| Wattage | 200W |
| Lamp Life | 2,000 (Normal) - 3,000 (Economy) Hrs. |
Questions about this item
Will the 200W UHP lamp fit the existing housing in my Vidikron Vision Model 65 projector?
Yes, the module arrives as a fully assembled bulb and housing designed for the Vision Model 65, so it installs directly without reusing the old cage.
How can I confirm the lamp is operating correctly after installation?
The projector should ignite cleanly, display a stable image at the rated 200W, and the lamp-hour counter will track up to 2000 hours in normal mode or 3000 hours in economy mode.
Does the package include the complete lamp module or only the bare bulb?
It ships as a complete lamp module — Philips UHP 200W bulb pre-mounted in the housing — so no separate cage or tools are required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
MADE IN USA TONER toner cartridge for KIP 7170 103 2 x 400 gm black
- Black
- Compatible



