We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular power adapter with four 2.1mm DC output cables

VideoSecu

VideoSecu PW154-N1 4-Channel 12V 2A Power Adapter 2.1mm

SKU CH-3QAW-1W60C

A 12 V 2 A regulated supply with four 2.1 mm connectors powers four CCTV cameras from 100-240 V AC input

  • TypeOther
  • Specifications• 12V DC Power Supply for 4 CCTV Cameras
  • Features• Input: AC 100V-240V 0.25A MAX • Output: DC 12V 2A (2000mA)
  • Package Contents1x 4CH Power Supply
  • Powers four cameras from one outlet with 12 V 2 A output
  • Works worldwide on 100-240 V AC input without extra converters
  • Four 2.1 mm DC plugs connect directly to standard CCTV leads
  • Switch-mode regulation delivers stable 12 V DC to each channel
  • Compact single-unit design replaces four separate wall-wart adapters

Power supply for four cameras

The VideoSecu PW154-N1 delivers 12 V DC at 2 A from a 100 V to 240 V AC input. Four 2.1 mm barrel connectors let you run up to four 12 V CCTV cameras from one compact unit. It replaces a tangle of individual wall-warts with a single regulated source.

Replaces separate adapters

Swapping four plug-in supplies for this block cuts cable clutter and frees three mains sockets. The change is worthwhile when all cameras share a 12 V rail and the combined draw stays within 2 A. Systems needing more current or a different voltage will need another solution.

Check connector size and total load

Verify every camera uses a 2.1 mm centre-positive barrel jack before ordering. Add the rated current of each camera; the sum must not exceed 2 A. Confirm the installation site can accept a 100 V to 240 V AC supply.

Highlights

  • Powers four cameras from one outlet with 12 V 2 A output
  • Works worldwide on 100-240 V AC input without extra converters
  • Four 2.1 mm DC plugs connect directly to standard CCTV leads
  • Switch-mode regulation delivers stable 12 V DC to each channel
  • Compact single-unit design replaces four separate wall-wart adapters

Specifications

BrandVideoSecu
ModelPW154-N1
TypeOther
Specifications• 12V DC Power Supply for 4 CCTV Cameras
Features• Input: AC 100V-240V 0.25A MAX • Output: DC 12V 2A (2000mA) • 4 of 2.1mm DC connectors
Package Contents1x 4CH Power Supply

Questions about this item

Does the adapter include the 2.1 mm DC plugs for four cameras?

Yes, the unit provides four 2.1 mm DC connectors for powering up to four 12 V CCTV cameras.

What is the correct way to connect the AC side before powering the cameras?

Plug the adapter into a 100–240 V AC outlet first, then attach each camera to its 2.1 mm DC lead.

When should the power supply be replaced if cameras start losing video at night?

If the 2 A output can no longer sustain all four cameras during IR illumination, replace the adapter.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.