We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black articulating TV wall mount with dual arms extended, rectangular cable covers visible, folded depth shown against wall

VideoSecu

VideoSecu MW480B-N2 Full Motion TV Mount 135lb 24in Extension VESA 684x400mm Black

SKU CH-KEEZ-47GGY

Full-motion TV wall mount supports screens up to 88 inches and 135 lbs, extends 24 inches from the wall, and offers tilt, swivel, and post-install level adjustment

  • NameMW480B-N2
  • Mount StyleFull Motion
  • ColorBlack
  • MovableRoll +/ - 5 degrees for level adjustment
  • TV Size Capacity< 90"
  • TV Weight CapacityLoad capacity 135lbs
  • Supports heavy screens up to 135 lbs load capacity
  • Extends 24 inch from wall and folds to 2.77 inch depth
  • Tilts 12° forward and 8° back for glare reduction
  • Swivels left and right plus roll adjusts ±5° for level
  • Fits VESA patterns 200-691 mm wide and 100-480 mm high

Full-motion mount for large displays

The VideoSecu MW480B-N2 is a full-motion TV wall mount built for screens up to 90 inches and a 135lb load capacity. It supports VESA patterns from 200x100mm through 684x400mm and any hole spacing within 200-691mm wide by 100-480mm high. The mount fits 40 to 80 inch displays and selected 88 inch models when VESA and weight match. Installers who need a fixed or low-profile bracket will not be served by this articulating design.

24-inch extension with post-install level adjustment

The arm extends up to 24 inches from the wall and folds back to 2.77 inches, mounting on studs spaced 25 inches apart. Tilt ranges 12 degrees forward and 8 degrees backward while roll allows +/-5 degrees for fine levelling after the TV is hung. A lock-and-release mechanism secures the display, rectangular cable covers conceal wires, and the TV centre can shift laterally on the wall plate to middle, left or right positions. Builders without wood studs or with narrower stud spacing cannot use the supplied hardware.

Passive cooling with no power draw

The mount operates mechanically, so it adds no heat, fan noise or electrical load to the installation. All movement relies on manual articulation, keeping the viewing area silent during adjustment. The steel construction and black finish are rated for the stated 135lb capacity without active thermal management. Users who require motorised positioning or powered cable routing will need a different solution.

Highlights

  • Supports heavy screens up to 135 lbs load capacity
  • Extends 24 inch from wall and folds to 2.77 inch depth
  • Tilts 12° forward and 8° back for glare reduction
  • Swivels left and right plus roll adjusts ±5° for level
  • Fits VESA patterns 200-691 mm wide and 100-480 mm high

Specifications

BrandVideoSecu
NameMW480B-N2
Mount StyleFull Motion
ColorBlack
MovableRoll +/ - 5 degrees for level adjustment
TV Size Capacity< 90"
TV Weight CapacityLoad capacity 135lbs
VESA Compatible684x400/ 684x300/ 600x400/ 500x300/ 400x400/ 400x300/ 300x300/ 300x200/ 200x200/ 200x100mm or any hole patterns within 200-691mm wide and 100-480mm high
Tools Necessary*Loading 135lbs *VESA 200-691mm wide and 100-480mm high *Tilt 12 degree forward and 8 degree backward Extension 24" *Post-installation level adjustment

Questions about this item

What VESA range does the MW480B-N2 support and what is the maximum TV weight it can hold?

The mount accepts any hole pattern between 200 mm and 691 mm wide and 100 mm to 480 mm high, covering standard VESA sizes such as 684x400, 600x400 and 400x400, and it is rated for up to 135 lbs.

How far apart must the wall studs be for this full-motion bracket?

The wall plate is designed to span wood studs spaced 25 inches apart, so the lag bolts anchor directly into two studs.

What is the correct order for setting the tilt and roll on this articulating arm?

Mount the TV, extend the arm to the desired position, set the 12° forward or 8° backward tilt first, then use the ±5° roll adjustment to level the screen before tightening the lock.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.