VideoSecu MP409B-A3 Tilt TV Mount 26-47in VESA 400x400 55lbs

What this tilt mount fits

The VideoSecu MP409B-A3 is a black steel tilting bracket designed for flat-panel screens from 26 up to 47 inches that weigh no more than 55 lbs. It accepts VESA hole patterns from 100x100 mm through 400x400 mm and any rectangular layout within a 100-400 mm width and height range. The low-profile design holds the display roughly 2 inches from the wall while allowing 10 degrees of forward tilt for glare reduction.

Check your screen and wall before ordering

Verify that your display’s VESA mounting holes fall within the supported patterns and that the screen weight does not exceed 55 lbs. Measure the hole spacing to confirm it lies between 100 mm and 400 mm both horizontally and vertically. Ensure the wall studs are spaced 16 inches apart so the bracket can be secured properly. Note that the manufacturer warns this mount does not fit 42-inch or larger TVs produced before 2013.

Thermals noise and power draw

This is a passive mechanical bracket with no electrical components, so it generates no heat, produces no noise and draws no power. The heavy-duty steel construction and end-cap locking system provide a stable, vibration-free hold once installed. The built-in bubble level helps achieve an accurate alignment during setup, and the quick-release tabs allow the screen to be detached easily for maintenance or relocation.