We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black articulating TV wall mount with extended arms folded close to the wall plate

VideoSecu

VideoSecu ML532B-A1 Full Motion TV Wall Mount 22-47" 66lbs VESA 400x400

SKU CH-HR8C-AG2ST

Full-motion wall bracket holds 22–47 inch TVs up to 66 lbs, tilts ±15°, swivels 180°, extends 20″ and folds to 1.9″ depth

  • NameFull Motion TV Wall Mount
  • Mount StyleArticulating/Full Motion
  • ColorBlack
  • MovableTilt +/- 15°, Swivel 180°, Extend 20", Depth 1.9"
  • TV Size Capacity< 50"
  • TV Weight CapacityLoading capacity up to 66lbs
  • Supports TVs up to 66lbs for secure mounting
  • Extends 20 inches from wall for flexible positioning
  • Tilts 15 degrees up or down to reduce glare
  • Swivels 180 degrees left or right for wide viewing
  • Folds to 1.9 inch depth for low-profile look

Mount for 22 to 47 inch screens

The VideoSecu ML532B-A1 is a full-motion wall bracket built for flat-panel TVs from 22 to 47 inches, with some 55 inch LED sets also supported when VESA pattern and weight match. It carries displays up to 66 lbs and fits eight VESA hole patterns from 100x100 mm to 400x400 mm. The powder-coated steel arms articulate to give tilt, swivel and extension in a single unit. Installers get a low-profile fold depth of 1.9 inches when the screen is pushed back.

Tilt 15°, swivel 180°, extend 20

The mount tilts 15 degrees up or down to cut glare, swivels 180 degrees left or right for corner viewing, and extends up to 20 inches from the wall for access to rear ports. At full extension the arms support the rated 66 lb load, but leverage increases with heavier screens so the practical comfort zone sits below the maximum weight. The 1.9 inch retracted depth keeps the installation neat against the wall when the TV is not pulled out. VESA patterns up to 400x400 mm are covered; larger patterns are not supported.

Needs solid wall, frees up floor space

The bracket mounts to wood studs, concrete or brick using the supplied hardware; drywall-only fixing is not adequate for the stated load. No stand or cabinet is required, freeing floor area and allowing the screen to float at eye level. Cable routing channels run along the arms to keep leads tidy during articulation. The package includes a post-installation level adjustment so the display can be levelled without remounting the plate. Buyers with screens heavier than 66 lbs or VESA patterns larger than 400x400 mm need a different mount.

Highlights

  • Supports TVs up to 66lbs for secure mounting
  • Extends 20 inches from wall for flexible positioning
  • Tilts 15 degrees up or down to reduce glare
  • Swivels 180 degrees left or right for wide viewing
  • Folds to 1.9 inch depth for low-profile look

Specifications

BrandVideoSecu
ModelML532B-A1
NameFull Motion TV Wall Mount
Mount StyleArticulating/Full Motion
ColorBlack
MovableTilt +/- 15°, Swivel 180°, Extend 20", Depth 1.9"
TV Size Capacity< 50"
TV Weight CapacityLoading capacity up to 66lbs
VESA Compatible400x400/ 400x300/ 400x200/ 300x300/ 300x200/ 200x200/ 200x100/ 100x100
Feature*Tilt +/- 15º, Swivel 180°, Extension 20", Low profile 1.9" depth *Premium quality - constructed with thick, heavy duty durable powder-coated black steel *Post-installation level adjustment allows the TV to perfectly level *Multi-directional adjustment tilt, swivel and extend for perfect viewing angle *Nesting arm design allows display to be folded parallel to the wall to save space

Questions about this item

Will the ML532B-A1 attach to my existing TV if it uses a 200x200 VESA pattern?

Yes, the mount supports VESA patterns from 100x100 mm up to 400x400 mm, so a 200x200 TV will fit.

How can I confirm the ML532B-A1 is moving correctly after I mount it?

Tilt the screen up or down 15° and swivel it left or right through 180°; the arms should extend smoothly out to 20" and retract to 1.9" from the wall.

What hardware comes with the ML532B-A1 and what must I supply myself?

The box includes the wall plate, articulated arms, mounting brackets and standard lag bolts for wood studs; concrete anchors or longer bolts for metal studs are not included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.