We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel full-motion TV wall mount with articulating arms extended, VESA plate visible

VideoSecu

VideoSecu ML531B-A2 Full Motion TV Mount 20" Extension 66lbs VESA 200x200 200x100 100x100 75x75mm Black

SKU CH-MMYD-KECYC

Full-motion wall mount extends 20 inches, swivels 180°, tilts 15° and holds TVs up to 40 inches and 66 lbs with VESA patterns from 75×75 to 200×200 mm

  • NameFull Motion TV Wall Mount
  • Mount StyleArticulating/Full Motion
  • ColorBlack
  • MovableTilt +/- 15°, Swivel 180°, Extend 20", Depth 1.9"
  • TV Size Capacity< 40"
  • TV Weight Capacity66lbs/30kg
  • Full motion articulation enables 180° swivel and ±15° tilt for optimal viewing angles
  • 20-inch extension pulls the screen forward then retracts to a 1.9-inch low profile
  • Heavy-duty steel construction supports displays up to 66 lbs with VESA patterns from 75×75 mm to 200×200 mm
  • Includes 10 ft HDMI cable and 6-inch 3-axis magnetic bubble level for easier setup
  • Fits most 22–37 inch TVs and selected models up to 42 inches when VESA and weight match

Articulating mount for TVs up to 40

The VideoSecu ML531B-A2 is a full-motion wall bracket built for flat panels weighing up to 66lbs. It supports VESA patterns of 200x200, 200x100, 100x100 and 75x75mm, covering most 22 to 37 inch displays and some up to 42 inch. The black powder-coated steel frame includes a removable VESA plate for simpler mounting. A 10ft HDMI cable and a 6-inch magnetic bubble level ship in the box.

Sustained load and daily adjustment

The arm extends smoothly to 20 inches and retracts to a 1.9 inch low profile, holding its position without drift during repeated tilt and swivel cycles. Tilt range is +/-15 degrees and swivel reaches 180 degrees, both operating on the same articulated joints that carry the full 30kg rating. The nesting design keeps the load path short, so the mount stays rigid when the screen is pushed flat against the wall.

Replaces fixed or limited-tilt brackets

This unit upgrades installations that only offer static positioning or shallow tilt, adding full articulation for corner seating or glare reduction. It is not suited for screens larger than 40 inches or heavier than 66lbs, nor for VESA patterns outside the four listed sizes. Buyers needing dual-arm support or in-wall cable management should look elsewhere.

Highlights

  • Full motion articulation enables 180° swivel and ±15° tilt for optimal viewing angles
  • 20-inch extension pulls the screen forward then retracts to a 1.9-inch low profile
  • Heavy-duty steel construction supports displays up to 66 lbs with VESA patterns from 75×75 mm to 200×200 mm
  • Includes 10 ft HDMI cable and 6-inch 3-axis magnetic bubble level for easier setup
  • Fits most 22–37 inch TVs and selected models up to 42 inches when VESA and weight match

Specifications

BrandVideoSecu
ModelML531B-A2
NameFull Motion TV Wall Mount
Mount StyleArticulating/Full Motion
ColorBlack
MovableTilt +/- 15°, Swivel 180°, Extend 20", Depth 1.9"
TV Size Capacity< 40"
TV Weight Capacity66lbs/30kg
VESA Compatible200x200/ 200x100/ 100x100/ 75x75mm
Feature*Multi-directional adjustment tilt, swivel and extend for perfect viewing angle *Nesting arm design: the mount can be folded parallel to the wall to save space *Premium quality: heavy duty steel construction with powder coated black finish *Post-installation level adjustment allows the TV to perfectly level *Tilt +/- 15°, Swivel 180°, Extend 20", Depth 1.9"

Questions about this item

Does the articulating arm generate any noise or heat when the TV is left extended all day?

The mount is a passive steel bracket with no moving parts that produce noise or heat; it simply holds the TV at the chosen position.

What tools or wall hardware must I already have before installing this ML531B-A2?

You will need a drill, appropriate masonry or wood anchors for your wall type, a socket set for the lag bolts, and a stud finder to locate secure mounting points.

Will the 200 × 200 mm VESA plate on this mount fit the older 32-inch Sceptre models listed in the title?

Yes, those Sceptre models use a 200 × 200 mm pattern, which matches one of the four VESA patterns supported by this bracket.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.