VideoSecu
VideoSecu MIC03D4 4 Pack Surveillance Accessory
Four high-gain preamp microphones capture audio evidence for CCTV systems, each with a combined power and audio cable and free warning decals
- TypeHigh Sensitive Pre-amp Microphone
- SpecificationsCollect audio evidence as important as capturing video evide
- Features• A combined power and audio cable are included with the mic
- Package Contents4x Audio Microphone, Free Warning Decals
- Collect audio evidence alongside video with high-gain preamp microphone
- Combined power and audio cable simplifies installation for each unit
- Built-in IC preamp delivers low noise and high gain with auto level adjustment
- Power in/out design lets microphone share camera power source (6-15V DC)
- Four microphones plus free warning decals included in the pack
Four-Pack Preamp Microphones
This four-pack of high-gain preamp microphones adds audio capture to CCTV installations. Each unit includes a combined power and audio cable for straightforward wiring. The built-in IC preamplifier boosts low-level signals with low noise and automatic level adjustment. The kit is intended for installers who need synchronised sound recording across multiple camera positions.
Power Sharing and Signal Quality
The microphones accept 6-15 V DC and feature a power-in and power-out design that lets them share the camera’s supply. This arrangement reduces the number of separate power runs required on site. The onboard preamp raises the microphone’s output to a usable line level while keeping noise low. Automatic gain control helps maintain consistent levels without manual trimming.
Included Cables and Warning Decals
Every microphone ships with its own combined power and audio cable, so no extra loom is needed for the four channels. Free warning decals are also supplied to meet signage requirements for audio recording. The package contains only the microphones, cables and decals; no additional software or mounting hardware is provided. Installers should verify cable length suits each camera location before fitting.
Highlights
- Collect audio evidence alongside video with high-gain preamp microphone
- Combined power and audio cable simplifies installation for each unit
- Built-in IC preamp delivers low noise and high gain with auto level adjustment
- Power in/out design lets microphone share camera power source (6-15V DC)
- Four microphones plus free warning decals included in the pack
Specifications
| Brand | VideoSecu |
|---|---|
| Model | MIC03D4 |
| Type | High Sensitive Pre-amp Microphone |
| Specifications | Collect audio evidence as important as capturing video evidence |
| Features | • A combined power and audio cable are included with the microphone • Preamplifier used to increase a microphone's low output voltage to a stronger usable level • Built in on board IC preamp, low noise, high gain and auto level adjustment • Pick up every sound with the super high gain micro audio system |
| Package Contents | 4x Audio Microphone, Free Warning Decals |
Questions about this item
How do I connect the combined power and audio cable to share the camera's 6-15V DC supply?
Plug the cable into the microphone and the camera so the mic draws power from the same 6-15V DC source; the step people miss is confirming the camera can supply enough current for both devices.
What part will need replacement first on the built-in IC preamp microphone?
The electret capsule inside the preamp microphone is the wear item; it can lose sensitivity over time and will need swapping before the onboard IC or cable.
At what voltage does the line-level output start to clip during long recording sessions?
The line-level output clips if the shared 6-15V DC rail sags below the preamp's minimum operating voltage, so the supply headroom is the first limit under sustained use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



