We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eight coiled cables with BNC and power connectors, black jacket, 150ft each

VideoSecu

VideoSecu CBV1508 8-pack 150ft BNC video power cables surveillance accessory

SKU CH-TM5R-H6TDY

Eight 150 ft cables carry both video and DC power to CCTV cameras with BNC and 2.1 mm connectors

  • TypeVideo & Power Cable
  • Specifications•150ft video and power cable •For camera with DC power only
  • Features•Used with Closed Circuit Television (CCTV) applications and
  • Package Contents8x 150ft Cable and Free BNC RCA adapters
  • Simplify installation with a single cable carrying both video and power
  • Ready to use immediately with pre-terminated BNC male and 2.1mm power connectors
  • Extend camera runs up to 150ft without extra couplers or joins
  • Includes eight cables plus BNC-to-RCA adapters for flexible device compatibility
  • Designed for standard DC-powered CCTV cameras in closed-circuit surveillance systems

Eight-cable kit for analogue CCTV runs

This eight-pack supplies 150ft combined video and power cables for analogue security cameras that use DC power. Each cable carries both signals in a single jacket, reducing the number of runs needed between a camera and a DVR or monitor. The bundle is aimed at installers wiring multiple fixed cameras in a standard closed-circuit television system.

BNC male video and 2.1mm centre-positive power only

The video end is a BNC male connector and the power end is a 2.1mm centre-positive plug, so the cable works only with equipment that matches those exact interfaces. It will not support SDI or HD cameras, and it cannot be used with cameras that require a different power polarity or connector type. The pre-terminated ends mean no crimping or soldering is required during installation.

150ft combined length per cable decides reach

Each of the eight cables provides a 150ft run for both video and power, which sets the maximum distance between a camera and its recorder or power source. If a camera location exceeds that distance, this kit cannot bridge the gap without additional extension methods. The fixed length also means excess cable must be managed on shorter runs.

Highlights

  • Simplify installation with a single cable carrying both video and power
  • Ready to use immediately with pre-terminated BNC male and 2.1mm power connectors
  • Extend camera runs up to 150ft without extra couplers or joins
  • Includes eight cables plus BNC-to-RCA adapters for flexible device compatibility
  • Designed for standard DC-powered CCTV cameras in closed-circuit surveillance systems

Specifications

BrandVideoSecu
ModelCBV1508
TypeVideo & Power Cable
Specifications•150ft video and power cable •For camera with DC power only • Video Connection: BNC male •Power Connection: 2.1mm center positive power plug
Features•Used with Closed Circuit Television (CCTV) applications and security camera components •The pre-terminated CCTV cable simplify the installation of security systems, use one cable to transmit video and power
Package Contents8x 150ft Cable and Free BNC RCA adapters

Questions about this item

Should I pick the 8-pack of 150ft cables or buy single lengths instead?

The 8-pack gives you eight pre-terminated 150ft runs with BNC male video and 2.1mm centre-positive power plugs, plus free BNC-to-RCA adapters, so one box covers up to eight camera positions without extra connectors.

What does the 150ft length mean for video quality and power delivery on a real install?

At 150ft the combined cable carries analogue video and DC power together; signal loss stays acceptable for standard CCTV cameras, but the bundle will not support SDI or HD cameras that need higher bandwidth or different power specs.

How do the BNC male and 2.1mm plugs limit what recorders or cameras I can connect?

The BNC male ends mate with standard DVR inputs and the included RCA adapters, while the 2.1mm centre-positive plug fits cameras that take DC power only — SDI, HD or AC-powered units cannot use this cable.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.