VideoSecu
VideoSecu CBHD100-N1 100ft all-in-one video power cable surveillance accessory
A 100ft all-in-one cable carries video and DC power to HD analog cameras up to 960P using BNC and 2.1mm connectors
- TypeOther
- Specifications•Video Connection: BNC male•Power Connection: 2.1mm center p
- Features•All-in-one 100ft video and power cable support HD 960P/720P
- Package Contents100ft Cable and Free BNC RCA Connectors
- Single 100ft cable carries video and DC power
- Pure copper conductors deliver clear 960P and 720P signals
- Works with AHD CVI TVI and 960H analog cameras
- BNC male video plus 2.1mm power plug for quick hook-up
- Two RCA BNC adapters included for flexible connections
Video and power in one 100ft run
This all-in-one cable combines a BNC male video connection with a 2.1mm centre-positive power plug so a single 100ft length carries both signal and DC supply. It is built from pure copper and supports HD analog cameras at 960P and 720P as well as AHD, CVI and TVI formats. The package includes two RCA/BNC adapters for added flexibility. Installers can extend camera reach without running separate wires.
Suits analog HD cameras with DC power input
The cord works with 960H, 700TVL and 1000TVL cameras that accept a 2.1mm centre-positive plug and a BNC video jack. It is not suitable for IP cameras that require Ethernet cabling or PoE, nor for devices that use a different power connector size or polarity. Buyers needing longer runs or a different voltage connector should look elsewhere.
100ft combined video and power length
The single specification that decides fit is the 100ft all-in-one length with BNC male and 2.1mm power ends. If the installation distance exceeds this length or the camera uses another power jack, this cable will not meet the requirement.
Highlights
- Single 100ft cable carries video and DC power
- Pure copper conductors deliver clear 960P and 720P signals
- Works with AHD CVI TVI and 960H analog cameras
- BNC male video plus 2.1mm power plug for quick hook-up
- Two RCA BNC adapters included for flexible connections
Specifications
| Brand | VideoSecu |
|---|---|
| Model | CBHD100-N1 |
| Type | Other |
| Specifications | •Video Connection: BNC male•Power Connection: 2.1mm center positive power plug•Be made of pure copper and good quality |
| Features | •All-in-one 100ft video and power cable support HD 960P/720P, AHD, CVI, TVI HD Analog security camera•Easily connect to 960H 700TVL 1000TVL security camera•Transmit video signals and supply DC power for security camera•For camera with DC power only |
| Package Contents | 100ft Cable and Free BNC RCA Connectors |
Questions about this item
What comes in the box and do I need any extra connectors?
The box contains the 100ft all-in-one cable with BNC male video ends and a 2.1mm centre-positive power plug plus two RCA/BNC adapters so no extra connectors are required.
Should I pick this cable for a 960P camera or a 720P camera?
The cable supports both 960P and 720P as well as AHD, CVI, TVI and 960H 700TVL 1000TVL analog cameras so either resolution works.
Will the 100ft length still deliver clean video and power to my DVR?
The pure-copper construction carries video signals and DC power over the full 100ft run for plug-and-play operation with supported analog cameras.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Sony SNCCX600 network camera 1280 x 720 30 fps
- IPv4 TCP UDP ARP IC…
- Cable



