We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black powder-coated steel ceiling adaptor, 7.6 inches tall, 5 by 5.5 inch base

Video Mount Products

Video Mount Products TCA1 Ceiling Adaptor Mount 75 lb

SKU CH-GN0D-MXVFK

A ceiling adaptor that connects 3-inch mounts to 1.5-inch NPT pipe, supports 180 lb, and includes cable pass-throughs

  • Supports up to 75 lb load capacity
  • 180 lb ceiling adaptor rating for heavy projectors
  • Works with 1.5" NPT pipe and VMP masts
  • Cable pass-throughs keep wiring tidy
  • Powder-coated steel construction resists corrosion

Ceiling Adaptor for Projector Mounts

The Video Mount Products TCA1 ceiling adaptor connects to a 3 inch by 3 inch ceiling plate and accepts 1.5 inch NPT pipe or any VMP ceiling mast. It supports a load capacity of 180 lb while the assembly is rated for 75 lb. The steel construction features a black powder coated finish and integrated cable pass throughs for tidy routing.

Thermals Noise and Power Draw

This is a passive mechanical component with no active cooling fans or electrical circuits. It produces no audible noise and draws zero power during operation. The steel body simply transfers the projector weight to the structural ceiling mount without generating heat.

Build Integration and Clearance

The adaptor measures 7.6 inches in overall height, 5 inches in width and 5.5 inches in depth, adding minimal drop between the ceiling plate and the mast. It frees up cable management by providing dedicated pass through openings. Installation requires a compatible 3 inch by 3 inch ceiling mount and 1.5 inch NPT pipe or VMP mast, which are not included.

Highlights

  • Supports up to 75 lb load capacity
  • 180 lb ceiling adaptor rating for heavy projectors
  • Works with 1.5" NPT pipe and VMP masts
  • Cable pass-throughs keep wiring tidy
  • Powder-coated steel construction resists corrosion

Specifications

BrandVIDEO MOUNT PRODUCTS

Questions about this item

How do I install the TCA1 ceiling adaptor onto a 1.5" NPT pipe and what step is often missed?

Thread the adaptor onto the 1.5" NPT pipe until tight, then secure it to the ceiling mount using the 3 x 3" bolt pattern; the step often missed is aligning the cable pass-throughs before final tightening.

What maintenance will the powder-coated steel adaptor need over time?

Inspect the powder-coated finish annually for scratches or corrosion, tighten the 3 x 3" mounting bolts if vibration loosens them, and clear dust from the cable pass-throughs to maintain airflow.

Which limit appears first when the TCA1 holds a heavy projector continuously?

The 75 lb load capacity of the ceiling mount itself is reached before the adaptor's 180 lb rating, so the mount's limit governs sustained use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.