We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Victor acetylene cutting tip size 2 one-piece HAWA brass finish

Victor

Victor Cutting Tip 3-101-2 0331-0015 welding

SKU CH-9AQV-ZDQWR

Acetylene cutting tip for handheld or machine torches, one-piece HAWA design cuts 1 to 1 1/2 in steel at up to 19 in/min

  • Size/Dimensions3-101-2
  • MaterialHAWA
  • TypeOne Piece
  • One-piece HAWA construction resists wear during heavy cutting
  • Cuts 1 in to 1 1/2 in thick material with acetylene
  • Light-to-medium preheat flame suits fabrication and repair tasks
  • Fuel flow 10 to 18 scfh delivers consistent cutting performance
  • Fits Victor CA 1260, 1350, 1351, 1352, 24709 and 411-3 attachments

Victor 3-101-2 Cutting Tip for Oxy-Acetylene

This Victor 3-101-2 cutting tip is a one-piece design made from HAWA material for oxy-acetylene hand torches and machine torches. It handles light to medium preheat flames for fabrication, repair and maintenance work. The tip cuts steel from 1 in to 1 1/2 in thick at speeds up to 19 in/min.

One-Piece HAWA Construction and Attachment Fit

The one-piece HAWA build reduces internal joints that can leak or foul during extended cutting sessions. It mounts on Victor CA 1260, CA 1350, CA 1351, CA 1352, CA 24709 and CA 411-3 cutting attachments, so the same tip moves between handheld and machine setups without adapter changes.

Replaces Worn Tips on 3-101 Series Torches

This tip replaces a worn or damaged 3-101 series tip when kerf control slips or preheat becomes uneven. The jump is worth it when cut speed drops below 19 in/min on 1 in to 1 1/2 in plate or when acetylene flow drifts outside the 10 to 18 scfh window. It is not for propane or natural gas systems, nor for cutting thinner than 1 in where a smaller tip size is required.

Highlights

  • One-piece HAWA construction resists wear during heavy cutting
  • Cuts 1 in to 1 1/2 in thick material with acetylene
  • Light-to-medium preheat flame suits fabrication and repair tasks
  • Fuel flow 10 to 18 scfh delivers consistent cutting performance
  • Fits Victor CA 1260, 1350, 1351, 1352, 24709 and 411-3 attachments

Specifications

BrandVictor
Size/Dimensions3-101-2
MaterialHAWA
TypeOne Piece

Questions about this item

What fuel flow range does the 3-101-2 tip need for acetylene cutting?

This tip runs at 10 to 18 scfh with acetylene, delivering a light-to-medium preheat flame that supports a maximum cutting speed of 19 in/min and a 0.09 in kerf on material 1 to 1-1/2 in thick.

Which cutting attachments accept the 3-101-2 tip?

The tip fits Victor CA 1260, CA 1350, CA 1351, CA 1352, CA 24709 and CA 411-3 cutting attachments on both handheld and machine torches.

How is the one-piece 3-101-2 tip installed, and what mistake should be avoided?

Screw the tip straight into the compatible attachment until it seats firmly; the common error is cross-threading or over-tightening the single-piece HAWA body, which damages the seat and causes leaks.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.