Victor
Victor CS31182 Cutting Tip Acetylene Size 2
Acetylene cutting tip for handheld torches, size 2, one-piece design cuts 1 to 1 1/2 in thick steel with 10 to 18 scfh flow and 0.09 in kerf
- TypeWelding Parts & Supplies
- Cuts 1 to 1 1/2 in steel with acetylene fuel
- Medium preheat flame suits deseaming, gouging and weld prep
- One-piece tip design handles 10 to 18 scfh acetylene flow
- 09 in kerf width for precise material removal
- Fits Victor CA 1260, 1350, 1351, 1352, 24709, 411-3 attachments
Victor CS31182 Acetylene Cutting Tip
The Victor CS31182 is a one-piece acetylene cutting tip sized for tip series 3-118 and tip size 2. It is built for hand-held torch use in applications such as deseaming, gouging, scarfing, rivet washing and weld preparation.
Compatibility — check your torch and attachment
Verify that your torch accepts the 3-118 tip series and that your cutting attachment is one of the compatible models: CA 1260, CA 1350, CA 1351, CA 1352, CA 24709 or CA 411-3. The tip is rated for material thicknesses between 1 in and 1 1/2 in.
Medium preheat flame with defined flow range
The tip produces a medium preheat flame and operates at an acetylene flow rate of 10 to 18 scfh. In normal use it delivers a kerf width of 0.09 in for the listed cutting range.
Highlights
- Cuts 1 to 1 1/2 in steel with acetylene fuel
- Medium preheat flame suits deseaming, gouging and weld prep
- One-piece tip design handles 10 to 18 scfh acetylene flow
- 09 in kerf width for precise material removal
- Fits Victor CA 1260, 1350, 1351, 1352, 24709, 411-3 attachments
Specifications
| Brand | FIREPOWER |
|---|---|
| Type | Welding Parts & Supplies |
Questions about this item
What comes with the Victor CS31182 cutting tip and is anything else needed to use it?
The box contains the one-piece tip only. You must supply a compatible Victor cutting attachment such as CA 1260, CA 1350, CA 1351, CA 1352, CA 24709 or CA 411-3, plus acetylene and oxygen supply.
Which tip size should I choose for the 3-118 series when cutting 1 to 1 1/2 inch steel?
Size 2 is the correct choice for that thickness range in the 3-118 series.
What does the 10 to 18 scfh acetylene flow figure mean when the tip is on a real torch?
It is the acetylene consumption range you will see at the regulator when cutting 1 to 1 1/2 inch plate with a medium preheat flame, producing a kerf about 0.09 in wide.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
