We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small brass cutting tip with threaded base and recessed orifice

Victor

Victor 6700-2589 Propylene Cutting Tip GPP-00

SKU CH-XQFQ-CX7K1

A propylene cutting tip for handheld or machine torches, fitting Victor HC 1200C and MT series with a maximum steel cutting thickness of 1/4 in

  • TypeWelding Parts & Supplies
  • Cuts steel up to 1/4 in with propylene fuel
  • Two-piece tip design for HC 1200C and MT series torches
  • Fits Victor ST 300FC, ST 400C, ST 900FC, ST 1000FC, ST 2600FC
  • Compatible with CA 2460, CA 2461, CA 2462 cutting attachments
  • Tip series 1-GPP size 00 for handheld and machine use

Propylene Cutting Tip for Handheld

This Victor 6700-2589 tip uses propylene fuel and fits the 1-GPP series in size 00. It is built for steel cutting with handheld or machine torches. The two-piece design works with several Victor torch and attachment models.

Sustained Cutting Performance on Steel

The tip is rated for a maximum cutting thickness of 1/4 in on steel. Compatible torch series include HC 1200C, MT 1065, MT 5, ST 1000FC, ST 2600FC, ST 300FC, ST 400C and ST 900FC. It also fits cutting attachments CA 2460, CA 2460+, CA 2461, CA 2461+, CA 2462, CA 2462+ and CA 411-1.

Verify Torch Series and Fuel Compatibility Before

Confirm that your torch belongs to one of the listed Victor series and that your fuel supply is propylene. The tip will not function with other fuel types or incompatible torch models. Check the series markings on your existing equipment to ensure a proper match.

Highlights

  • Cuts steel up to 1/4 in with propylene fuel
  • Two-piece tip design for HC 1200C and MT series torches
  • Fits Victor ST 300FC, ST 400C, ST 900FC, ST 1000FC, ST 2600FC
  • Compatible with CA 2460, CA 2461, CA 2462 cutting attachments
  • Tip series 1-GPP size 00 for handheld and machine use

Specifications

TypeWelding Parts & Supplies
BrandFIREPOWER

Questions about this item

Does the tip get hot enough to need active cooling during a full-day cutting job?

The tip is a passive metal component; heat is managed by the torch and fuel flow, not by the tip itself.

Which torch or cutting attachment must I already own to fit this GPP-00 tip?

It fits Victor torch series HC 1200C, MT 1065, MT 5, ST 1000FC, ST 2600FC, ST 300FC, ST 400C, ST 900FC and cutting attachments CA 2460, CA 2460+, CA 2461, CA 2461+, CA 2462, CA 2462+, CA 411-1.

Will this propylene tip work on my older Victor torch that currently uses an acetylene tip?

The tip is designed for propylene fuel only; using it with acetylene is not supported and could be unsafe.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.