Victor
Victor 0381G1480 Straight Cutting Torch 21 in 90° Head Cuts 8 in
Straight cutting torch with 90° head cuts up to 8 in using oxygen and fuel gases
- TypeWelding Supplies
- Cuts steel up to 8 in thick with proper tip
- 90° head angle gives clear sight line on workpiece
- 21 in overall length keeps hands away from heat
- Compatible with oxygen and all fuel gases using Victor 1 series tips
- Connects via standard 9/16-18 RH and LH fittings
Straight Cutting Torch 21 In
The Victor 0381G1480 is a straight cutting torch designed for oxygen and all fuel gases when paired with the proper cutting tip. It belongs to the Victor ST2600FC series and measures 21 in overall length. This tool is for operators who need a dedicated cutting torch and not a combination welding outfit.
90° Head Angle Cuts 8 In
The single specification that decides fit is the 90-degree head angle combined with an 8 in maximum cutting capacity. The torch uses Victor 1 Series tips and connects via 9/16-18 RH and LH inlets. Buyers who need a different head angle or a greater cutting depth should select another model.
Thermals Noise Power Draw
As a hand-held gas cutting torch, the unit produces no electrical noise and draws no power. Heat is generated only at the flame during active cutting and dissipates through the workpiece and surrounding air. Normal use requires proper gas regulation and tip selection for the material thickness.
Highlights
- Cuts steel up to 8 in thick with proper tip
- 90° head angle gives clear sight line on workpiece
- 21 in overall length keeps hands away from heat
- Compatible with oxygen and all fuel gases using Victor 1 series tips
- Connects via standard 9/16-18 RH and LH fittings
Specifications
| Brand | Victor |
|---|---|
| Model | 0381G1480 |
| Type | Welding Supplies |
Questions about this item
How thick a plate can the 21 in torch with its 90° head actually cut?
It cuts up to 8 in thick material when paired with the proper Victor 1 Series tip and correct gas pressures.
What does the 9/16-18 RH and LH inlet connection limit in daily use?
The 9/16-18 right-hand and left-hand threads mate only with matching regulator fittings, so you must use hoses and adapters built to that thread standard.
Will the 21 in length and 90° head clear my workpiece and bench?
The torch measures 21 in overall with a fixed 90° head, so measure from your regulator mount to the cut line to confirm reach and clearance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
