Victor
Victor 0330-0109 Cutting Tip Size 0 Acetylene
Acetylene cutting tip size 0 for handheld torches, covering 3/8 in to 1/2 in plate with Victor 1-118 series compatibility
- Size/Dimensions0
- TypeWelding Supplies
- Cuts 3/8 in to 1/2 in steel with size 0 acetylene tip
- One-piece tip design ensures consistent flame for clean cuts
- Fits Victor HC 1200C and ST series handheld torches
- Compatible with CA 2460, CA 2461 and CA 2462 cutting attachments
- Tip series 1-118 matches Victor equipment for reliable performance
Victor 0330-0109 Cutting Tip for Acetylene Torches
This Victor 0330-0109 cutting tip is a one-piece Size 0 consumable designed for handheld acetylene torches. It serves metalworkers and fabricators who need a replacement tip for compatible Victor cutting torches and attachments. The tip belongs to the 1-118 series and fits HC 1200C, ST 1000FC, ST 2600FC, ST 300FC, ST 400C and ST 900FC torch models. It also matches CA 2460, CA 2461, CA 2462 and CA 411-1 cutting attachments.
Thermal Performance and Gas Consumption
In normal use the tip produces a focused acetylene flame capable of cutting steel from 3/8 in up to 1/2 in thick. The one-piece construction maintains a stable flame envelope without loose components that could disturb flow. Fuel consumption and heat output scale with the selected oxygen and acetylene pressures for the Size 0 orifice. Operators should follow standard acetylene safety practices for pressure settings and tip maintenance.
Decisive Specification — Tip Size
The single specification that decides fit is the Size 0 rating combined with the 3/8 in to 1/2 in cutting thickness range. If the workpiece falls outside this window or the torch uses a different tip series, this tip will not perform correctly. Buyers who need to cut thinner or thicker material, or who run propane or propylene fuel, must select a different tip size or fuel-specific design.
Highlights
- Cuts 3/8 in to 1/2 in steel with size 0 acetylene tip
- One-piece tip design ensures consistent flame for clean cuts
- Fits Victor HC 1200C and ST series handheld torches
- Compatible with CA 2460, CA 2461 and CA 2462 cutting attachments
- Tip series 1-118 matches Victor equipment for reliable performance
Specifications
| Brand | VICTOR |
|---|---|
| Size/Dimensions | 0 |
| Type | Welding Supplies |
Questions about this item
How do I install the Victor 0330-0109 tip on my HC 1200C torch, and what step is often missed?
Thread the one-piece tip onto the HC 1200C torch head by hand, then tighten with the correct wrench; the step often missed is seating the tip squarely so the O-ring seals before final torque.
What maintenance or replacement will the size 0 acetylene tip need over time?
Clean the preheat and cutting orifices with tip cleaners after each use; replace the tip when the orifices become oval or the preheat flames turn uneven.
What limit appears first when cutting 1/2 in steel continuously with this tip?
The tip reaches its maximum cutting thickness of 1/2 in, so sustained cuts at that depth will overheat the tip and degrade cut quality before the torch itself limits.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
