We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear .7 oz instant adhesive tube with dropper tip

Vibra-TITE

Vibra-TITE 35420 Instant Adhesive Clear .7 oz Tube

SKU CH-3SQ8-H71W3

Clear instant adhesive in a .7 oz tube bonds fiberglass, leather and wood with humidity cure and 9,500–12,500 cps viscosity

  • ColorClear
  • Clear bond on multiple materials
  • Humidity cure creates strong hold
  • High viscosity fills gaps precisely
  • Dropper tip allows controlled drops
  • Meets A-A-3097 Type II Class 4

Instant Adhesive 35420

Vibra-TITE 35420 is a clear instant adhesive supplied in a .7 fl oz tube with a built-in dropper. The single-component formula cures through humidity exposure and suits general-purpose bonding tasks. It joins materials such as fiberglass, leather and wood in office, school or light workshop settings.

Thermals noise and power draw

As a room-temperature adhesive the product generates no heat, noise or electrical draw during application or cure. The high-viscosity liquid remains stable in the tube until humidity initiates the bonding reaction. No external power source or ventilation equipment is required for normal use.

Sustained load behaviour

Under continuous stress the cured bond maintains strength on approved substrates including fiberglass, leather and wood. The adhesive meets A-A-3097 Type II Class 4 performance requirements for structural integrity. Compatible accelerators 621, 623, 624, 625 and 626 can reduce fixture time without altering final bond properties.

Highlights

  • Clear bond on multiple materials
  • Humidity cure creates strong hold
  • High viscosity fills gaps precisely
  • Dropper tip allows controlled drops
  • Meets A-A-3097 Type II Class 4

Specifications

BrandVIBRA-TITE
ColorClear

Questions about this item

How do I apply the adhesive from the built-in dropper and what step is often missed?

Squeeze the tube gently to dispense a drop from the built-in dropper, then join the parts immediately — the cure starts on contact with humidity, so waiting too long before assembly is the common mistake.

What will need replacement after the tube is used up and are there compatible accelerators?

The .7 oz tube is single-use; when empty you buy a new tube. Compatible accelerators are Vibra-TITE 621, 623, 624, 625 and 626 if faster curing is required.

What viscosity limit appears first during sustained bonding work?

The adhesive viscosity ranges from 9,500 to 12,500 cps; at the upper end the thicker consistency can slow dropper flow and make thin bond lines harder to achieve during extended use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.