VEVOR
VEVOR ZD-40FL Wire Stripper 11 Channel 0.06-1.57 in 370W
Electric wire stripper with 11 feed channels handles 0.06 to 1.57 in copper cable using a 370 W motor and offers manual hand-crank backup
- TypeOther Appliances
- Handles 0.06-1.57 in wires with 11 feed channels
- 370W motor strips cable faster than manual tools
- Guide tube and deep V-groove protect thin wire cores
- Dual electric and hand-crank modes suit any job
- 65Mn blade with 45# steel shaft built for heavy use
Electric Wire Stripper with 11 Feed Channels
The VEVOR ZD-40FL is an automatic copper cable stripper designed for scrap recycling, DIY projects, garage tasks and small workshops. It processes wire diameters from 0.06 to 1.57 in (1.5 to 40 mm) across 11 feed channels. A 370W copper motor drives the unit, which also offers a manual hand crank mode for flexibility.
Check power supply and wire type before ordering
This machine requires a suitable electrical connection for its 370W motor and includes an emergency stop button for safety. Verify that your cables fall within the 0.06 to 1.57 in diameter range and are compatible with the stripping mechanism. The dual electric and manual modes provide options if power is unavailable.
Q235 steel base with 65Mn blades and 45# steel
The frame uses Q235 steel while the bearing seat is ADC12 alloy. Cutting blades are made from 65Mn steel and the main shaft with rollers uses 45# steel. A guide tube and deep V-groove rollers keep thin wires aligned during stripping, reducing slippage and core damage for clean results.
Highlights
- Handles 0.06-1.57 in wires with 11 feed channels
- 370W motor strips cable faster than manual tools
- Guide tube and deep V-groove protect thin wire cores
- Dual electric and hand-crank modes suit any job
- 65Mn blade with 45# steel shaft built for heavy use
Specifications
| Type | Other Appliances |
|---|
Questions about this item
Does the ZD-40FL come with extra blades or a hand crank, or must they be purchased separately?
The package includes the wire stripper machine only. Spare blades and the hand crank are not included and must be bought separately.
Should I pick the 11-channel ZD-40FL or a model with fewer channels for stripping 1.5 mm to 40 mm cables?
The 11 channels cover the full 1.5 mm to 40 mm range in one machine, so you avoid changing dies when switching wire sizes.
What does the 370 W motor rating mean for daily stripping speed on 12 mm copper cable?
The 370 W copper motor drives the rollers continuously, stripping 12 mm cable much faster than a hand-crank unit and without operator fatigue.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
