We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular mesh pool cover with brass anchors and stainless steel springs

VEVOR

VEVOR YYCM-7455 20 x 38 ft pool safety cover

SKU CH-YSJG-WZ7M7 MPN YYCM-7455

Green mesh safety cover fits an 18 x 36 ft pool with a right step and includes 26 stainless-steel springs and brass anchors

  • TypeOther Appliances
  • Width22.24
  • Covers 18 x 36 ft pool with 20 x 38 ft dimensions
  • Triple-stitched polypropylene mesh resists aging and abrasion
  • 26 brass anchors and 304 stainless-steel springs included
  • Adjustable spring tension from 13.7 to 25 for secure fit
  • Green tight-mesh surface allows rain permeability at 63.9 lb

Fits 18 x 36 ft Pool

This rectangular safety cover measures 20 x 38 ft to fit an 18 x 36 ft pool with a 4 x 8 ft right step. The extra two feet on each dimension prevent stretching and ensure complete coverage. It is designed for residential gardens or hotel pools requiring seasonal protection. The green polypropylene mesh keeps debris out while allowing rainwater to drain through.

Upgrades From Tarps or Loose Covers

The cover replaces temporary tarps or ill-fitting covers that shift in wind and let debris enter the water. The upgrade is worth it when a permanent anchoring system is preferred over weights or sandbags. Brass anchors install permanently into concrete and 26 stainless-steel springs provide adjustable tension between 13.7 and 25 inches. Triple-stitched, double-strapped construction resists aging and abrasion over multiple winters.

Mesh Permeability and Hardware Limits

The tight mesh surface allows rain permeability but will not block fine silt or algae spores that pass through the weave. The cover adds 63.9 lb (29 kg) of distributed weight across the deck area. Installation requires drilling into concrete for the 26 brass ground bolts and the included tool set. The 304 stainless-steel springs adjust within the stated range but cannot compensate for excessive deck movement or settling.

Highlights

  • Covers 18 x 36 ft pool with 20 x 38 ft dimensions
  • Triple-stitched polypropylene mesh resists aging and abrasion
  • 26 brass anchors and 304 stainless-steel springs included
  • Adjustable spring tension from 13.7 to 25 for secure fit
  • Green tight-mesh surface allows rain permeability at 63.9 lb

Specifications

TypeOther Appliances
Width22.24

Questions about this item

How much concrete deck space does the 20 x 38 ft cover with its 4 x 8 ft right step need for the brass anchors?

The cover is 2 ft larger than the 18 x 36 ft pool on every side, so the anchors sit roughly 1 ft back from the waterline around the full perimeter and the step cut-out.

Which installation step is most often done incorrectly with the adjustable 13.7-25 in stainless-steel springs?

Installers frequently leave the springs at their shortest 13.7 in setting instead of extending them until the mesh is drum-tight across the 20 x 38 ft surface.

When should the 26 tension springs and 26 brass ground bolts be inspected or replaced on this polypropylene mesh cover?

Check every spring and bolt for corrosion or elongation each autumn before winterizing; replace any that no longer hold the cover flat against the 18 x 36 ft pool.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.