VEVOR
VEVOR YLP-SS-2G Slat Wall Panels 2 x 4 ft PVC Grey 300 lbs
Grey PVC slat wall panels hold 300 lbs each and install with a modular coupling design
- TypeOther Appliances
- Width13.39
- Holds 300 lbs per panel with PVC strength
- Modular coupling structure enables flexible storage layouts
- DIY cutting fits any garage or workshop space
- Two 1225 x 645 mm panels cover large wall areas
- Includes 20 screws plus trim strips for quick mounting
Grey PVC Slatwall Panels
Two grey PVC slatwall panels each measure 1225 by 645 by 20 millimetres and weigh 5 kilograms. The modular design uses a coupling structure so panels join together for larger walls. Each panel supports 300 pounds or 136 kilograms of load. Panels can be cut to fit custom layouts.
Replacing Fixed Pegboard Systems
This kit replaces static pegboard or single-panel slatwall that cannot expand. The coupling structure lets you add width or height later without re-mounting the whole wall. The jump is worth it when storage needs change seasonally or when heavy items demand the 300-pound per-panel rating.
Sustained Heavy Load Behaviour
Under continuous load the PVC material resists sag across the 1225-millimetre span. The 20-millimetre panel thickness distributes weight to multiple wall studs through the supplied 20 screws. Trim strips cover cut edges so the wall stays rigid and the surface stays smooth during daily tool cycling.
Highlights
- Holds 300 lbs per panel with PVC strength
- Modular coupling structure enables flexible storage layouts
- DIY cutting fits any garage or workshop space
- Two 1225 x 645 mm panels cover large wall areas
- Includes 20 screws plus trim strips for quick mounting
Specifications
| Type | Other Appliances |
|---|---|
| Width | 13.39 |
Questions about this item
What wall spacing do the 1225 mm wide panels require for mounting?
The panels measure 1225 mm wide and 645 mm high; mount them to studs or solid blocking spaced to match those dimensions.
Which fixings are included and where do they go?
Twenty screws are supplied; drive them through the panel slots into the wall framing, then snap on the two 4 in and two 2.07 in trim strips.
When should the PVC panels or trim be replaced?
Replace a panel if it cracks, warps or can no longer hold the rated 300 lbs; swap trim strips if they become loose or damaged.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



