We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue hydraulic gear puller with three jaws and pump body in black case

VEVOR

VEVOR YL-15T 15 Ton Hydraulic Gear Puller 12" Spread

SKU CH-707J-N48TA

A 15‑ton hydraulic gear puller with 12‑inch spread, 2.2‑inch stroke and horizontal or vertical operation for bearings, gears and pulleys

  • TypeOther Appliances
  • Width4.13
  • 15-ton pulling capacity handles heavy bearings and gears
  • 12-inch maximum spread fits large hubs and pulleys
  • Integrated casting cylinder prevents oil leaks under load
  • 55 mm stroke pulls components in fewer pump cycles
  • Horizontal and vertical operation reaches awkward angles

15-ton hydraulic gear puller

The VEVOR YL-15T delivers up to 15 tons of pulling force for professional disassembly of bearings, gears and pulleys. It suits mechanics working on industrial machinery, railway components, ship equipment and mining hardware where high-force separation is required.

12-inch spread with 55 mm stroke

Maximum jaw spread reaches 12 inches (304.8 mm) while the integrated cylinder provides a 2.2 inch (55 mm) stroke. The leak-proof cast oil cylinder and thickened pump body limit operation to these dimensions, so components exceeding the spread or requiring longer travel cannot be pulled with this unit.

Replaces manual two- and three-jaw pullers

This hydraulic model upgrades from hand-tightened pullers by adding the pump body, handle and high-strength bolts for labour-saving vertical or horizontal pulls. The jump is worth it when repeated heavy-duty separation tasks make manual effort impractical or when the 15-ton capacity exceeds what mechanical screw pullers can deliver.

Highlights

  • 15-ton pulling capacity handles heavy bearings and gears
  • 12-inch maximum spread fits large hubs and pulleys
  • Integrated casting cylinder prevents oil leaks under load
  • 55 mm stroke pulls components in fewer pump cycles
  • Horizontal and vertical operation reaches awkward angles

Specifications

TypeOther Appliances
Width4.13

Questions about this item

Should I choose the two-jaw or three-jaw setup for my job?

The kit includes three jaws; use all three for even grip on round parts like bearings or gears, or remove one jaw for two-jaw work on flat surfaces such as pulley flanges.

What does the 15-ton rating mean when I am actually pulling a stuck hub?

The hydraulic cylinder can exert up to 15 tons of force at the jaws, enough to break loose seized automotive hubs, industrial bearings or railway components without hammering.

How far can the 12-inch spread jaws open, and what limits the reach?

Maximum jaw spread is 12 inches (304.8 mm); the 2.2-inch (55 mm) piston stroke sets the linear travel per pump cycle, so very deep recesses may need repositioning.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.