VEVOR
VEVOR Wet Tile Saw 10 in 65Mn Blade 4500 RPM Stand 0-45°
Cuts tiles up to 36 in straight or 24 in diagonal with a 10 in 65Mn blade at 4500 RPM, adjustable 0-45° and 3.75 in depth
- Adjustable 0-45° miter cuts for versatile tile layouts
- Infrared guidance line ensures precise straight and diagonal cuts
- Water reservoir suppresses dust for a cleaner workspace
- 10-inch 65Mn steel blade at 4500 RPM cuts hard stone
- Rolling stand with extension tables supports 36-inch tiles
Wet Tile Saw with 10-inch Blade
The VEVOR wet tile saw uses a 10-inch 65Mn steel blade driven by a 4500 RPM motor to cut ceramic tiles, floor tiles and stone. Adjustable miter angles from 0 to 45 degrees with detents at 22.5 degrees support straight and diagonal cuts up to 36 inches and 24 inches respectively. A removable polypropylene water reservoir suppresses dust during operation. The unit includes a main table, right and front extension tables, two wrenches and a user manual.
Water-Cooled Cutting and Dust Control
The detachable water tray feeds the blade to cool the cut and trap dust at the source, keeping the workspace cleaner and reducing airborne particles. The series-wound copper motor runs on 120 V AC at 60 Hz drawing 15 A and maintains 4500 RPM under load. Aluminium-alloy blade guard and extension tables add rigidity while the integrated infrared guide and built-in scale help align cuts accurately.
Upgrade from Handheld Cutters
This saw replaces score-and-snap tools or small handheld wet saws when projects demand repeatable straight or mitre cuts in large-format tile up to 36 inches long and 3.75 inches deep. The stand-mounted design with casters suits installers who move between job sites but need a stable cutting station. Buyers who only trim occasional mosaic sheets or need a cordless solution will not benefit from the fixed 120 V power requirement and bench-top footprint.
Highlights
- Adjustable 0-45° miter cuts for versatile tile layouts
- Infrared guidance line ensures precise straight and diagonal cuts
- Water reservoir suppresses dust for a cleaner workspace
- 10-inch 65Mn steel blade at 4500 RPM cuts hard stone
- Rolling stand with extension tables supports 36-inch tiles
Specifications
No published specifications for this item yet.
Questions about this item
How do I set up the 10 in 65Mn blade on the 5/8 in arbor and what step is often missed?
Mount the 10 in blade onto the 15.9 mm arbor using the two supplied wrenches; the step often missed is tightening the arbor nut against the blade flange until the 1.8 mm blade runs true at 4500 RPM.
Which parts of the wet tile saw will need replacement after extended use?
The 65Mn steel blade wears first and should be replaced when the 1.8 mm thickness no longer cuts cleanly; the detachable PP water tray and rubber casters may also need swapping if they crack or seize.
What limit appears first when cutting continuously at 4500 RPM on a 15 A circuit?
The series-wound motor draws 15 A at 120 V, so the 15 A breaker is the first limit reached during sustained heavy cuts before thermal protection activates.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
