We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Carbon steel welding table on wheels, 30 by 20 inch top, adjustable height and tilt angles

VEVOR

VEVOR Welding Table 30x20in 400lb WT400

SKU CH-4V6M-EESDR

A carbon-steel welding table with a 30 by 20 inch surface, three tilt angles, adjustable height from 25 to 32 inches and a 400 lb load capacity

  • TypeOther Appliances
  • Width22.44
  • Spacious 30 x 20 in surface fits intricate welding tasks
  • 400 lb load capacity on carbon steel frame ensures stability
  • Three tilt angles (0°, 30°, 90°) adapt to varied work positions
  • Adjustable height from 25 to 32 in suits different operators
  • Wheeled folding design with retractable guide rails enables mobile use

Welding Table 30x20in 400lb Capacity

This welding table provides a 30 by 20 inch carbon steel work surface for metal fabrication tasks. It supports hobbyists and professionals who need a stable platform for welding, assembly, or repair work. The frame is built from carbon steel for durability and rust prevention. It arrives new with all necessary hardware included.

Adjustable Height and Tilt Angles

The table height adjusts between 25 and 32 inches to suit different working postures. Three tilt settings at 0, 30, and 90 degrees allow positioning for various joint configurations. Two wheeled legs enable movement around the shop floor. Three slots measuring 1.1 by 22 inches accept clamps or stops for workpiece fixturing.

400lb Load Limit on Wheeled Frame

The 400 pound capacity covers most benchtop fabrication jobs and moderate weldments. Heavier structural assemblies or large castings will exceed this rating and require a stationary frame. The carbon steel top resists wear but can be damaged by severe impact or grinding debris. The table weighs 39.2 pounds, so it is portable but not a substitute for a fixed heavy-duty bench.

Highlights

  • Spacious 30 x 20 in surface fits intricate welding tasks
  • 400 lb load capacity on carbon steel frame ensures stability
  • Three tilt angles (0°, 30°, 90°) adapt to varied work positions
  • Adjustable height from 25 to 32 in suits different operators
  • Wheeled folding design with retractable guide rails enables mobile use

Specifications

TypeOther Appliances
Width22.44

Questions about this item

Will the 30 x 20 in tabletop still fit if I keep my existing 22 in wide tool chest beside it?

The tabletop measures 30 x 20 in, so you need at least 30 in of clear width; the 22.44 in specification refers to a different dimension and does not change the 30 in footprint.

How can I confirm the three tilt angles are locking at 0°, 30° and 90° after assembly?

Set the table to each detent, then place a digital angle gauge or protractor on the carbon steel surface; it should read 0°, 30° and 90° respectively with no play in the locking pins.

Does the package include clamps for the three 1.1" slots or must I buy them separately?

The box contains the welding table and a hardware set only; clamps or fixtures for the 1.1" x 22" slots are not included and must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.