MSD Ignition 84747 Ford Crate Engine Ignition Kit 351C-460
- Ford Crate Engine D…
- 8.80"
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
VEVOR
An 89-piece paintless dent repair kit with rods, pullers, glue gun and tabs for removing minor dents and door dings without damaging original paint
This 89-piece kit supplies the tools needed for paintless dent removal on cars, motorcycles, refrigerators and washing machines. It includes rods, a golden dent lifter, slide hammer, bridge puller, hot glue gun, 66 puller tabs, 10 glue sticks, an LED reflecting board, tap-down tool with nine heads and storage bags. The kit is designed to pop out minor dents and door dings without damaging the original paint finish.
Apply a heated glue stick to a puller tab, attach the tab to the dent centre and wait roughly two minutes for the glue to set. Then use the slide hammer, golden lifter, bridge puller or T-bar puller to pull the dent outward. The tap-down tool with interchangeable heads helps knock down high spots. Common issues are tabs releasing too early if glue cools, or excessive force stretching the panel; work gradually and reheat glue as needed.
Verify you can reach the back of the damaged panel for leverage tools or have a clean outer surface for glue tabs. The kit works on steel and aluminium body panels as well as similar metal appliances. It is not suited for dents with cracked paint, sharp creases, plastic bumpers or areas where structural reinforcement blocks tool access.
| Width | 6.69 |
|---|
Test the LED reflecting board under light to see dent shadows clearly, then use the golden dent lifter and slide hammer on a small ding — smooth metal return with no paint damage shows the tools are functioning.
The box includes 10 rods, slide hammer, golden dent lifter, LED reflecting board, bridge puller, hammer, rubber hammer, short T-bar puller, hot glue gun, 66 puller tabs, 10 glue sticks, tap down with 9 heads, plastic shovel, empty bottle, tool bag, and 2 woven bags — only additional glue sticks may be needed later.
The single VV-PR-T8901 model provides 10 rods (A6, B7-B11, C2, C4-C6) covering a range of dent depths and curves, plus both glue-pull and lever-pull tools, so one kit handles most minor dents and door dings.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?