We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular white foam shower tray 38 by 60 inches with central drain grate and two matching curbs

VEVOR

VEVOR VV-LYDZ-PVC3860Z 38x60 in shower curb kit bathroom tub

SKU CH-1V05-TVP8X MPN VV-LYDZ-PVC3860Z

A 38 in × 60 in EPS shower tray with a central drain, 304 stainless steel grate, PVC flange and two cuttable curbs for a watertight bathroom installation

  • TypeOther Appliances
  • EPS foam tray forms a 5° slope for fast drainage
  • 304 stainless grate with gravity seal prevents pipe blockage
  • Two cuttable XPS curbs adjust to any layout
  • 3 m² waterproof membrane covers the full wet zone
  • Includes trowel, corners, seals and flange for complete install

Shower tray kit for wet-room builds

The kit supplies a 38 in by 60 in EPS foam tray with a centred 4 in drain hole and a 5 degree fall to the centre. Two XPS curbs measuring 38 in by 4.5 in by 6 in can be trimmed to fit the opening. A 304 stainless steel grate, PVC bonding flange and 11.3 m² of water-impermeable membrane complete the watertight assembly.

Sustained drainage and structural stability

The pre-formed slope directs water continuously toward the central outlet without pooling. The gravity-sealed grate prevents debris build-up during long showers. High-density foam resists compression under tile and mortar loads, while the membrane and corner pieces maintain a sealed envelope over repeated thermal cycles.

Straightforward installation with common pitfalls

The tray, curbs and membrane are laid over a level subfloor and bonded with thin-set mortar using the supplied trowel. Curbs are cut on site to match the doorway width. The most frequent issues are an uneven subfloor that breaks the 5 degree fall, insufficient membrane overlap at corners, and forgetting to seat the flange collar before the final mortar bed.

Highlights

  • EPS foam tray forms a 5° slope for fast drainage
  • 304 stainless grate with gravity seal prevents pipe blockage
  • Two cuttable XPS curbs adjust to any layout
  • 3 m² waterproof membrane covers the full wet zone
  • Includes trowel, corners, seals and flange for complete install

Specifications

TypeOther Appliances

Questions about this item

Does the 304 stainless steel grate get noisy or hot when the shower runs all day?

The 304 stainless steel grate is a passive drain cover with no moving parts, so it produces no noise and does not generate heat during continuous use.

What must I already own to install the 38 in × 60 in shower tray and the two 38 in × 4.5 in × 6 in curbs?

You will need mortar or thin-set, a mixing bucket, a level, a utility knife for trimming the XPS curbs, and a 2-inch drain pipe to connect the PVC flange.

Will the 4 in PVC central bonding flange fit the 2-inch copper drain pipe I am keeping from the old bathroom?

The kit's drainage assistant is made for 2-inch pipes, so it will connect directly to your existing 2-inch copper drain without an adapter.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.