We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular shower tray 38 by 60 inches with central drain and stainless steel grate

VEVOR

VEVOR VV-LYDZ-ABS3860P Shower Curb Kit 38x60 in

SKU CH-V7RS-9KHKE MPN VV-LYDZ-ABS3860P

A watertight 38 by 60 inch shower tray kit with two cuttable curbs, an ABS bonding flange, a 304 stainless steel grate and 11.3 square metres of waterproof membrane

  • TypeOther Appliances
  • Pre-sloped tray directs water to the 10 cm drain
  • 38 in × 60 in EPS foam base with waterproof membrane
  • 304 stainless steel grate resists corrosion
  • Two 38 in × 4.5 in × 6 in XPS curbs cut to fit
  • Complete kit includes flange, corners, trowel and seals

Shower Curb Kit 38×60 in

This VEVOR VV-LYDZ-ABS3860P kit provides a complete shower-tray system measuring 38 in by 60 in. The EPS high-pressure foam tray forms a 5° slope toward a central 4 in drainage hole. Two XPS curbs at 38 in × 4.5 in × 6 in can be trimmed to length. A 304 stainless-steel grate and ABS flange seal the drain. The package includes water-impermeable membrane covering 121.3 sq ft plus corners, seals, a trowel and a drainage assistant for a watertight finish.

Check subfloor and drain alignment

Verify that the installation area accommodates the 38 in by 60 in tray footprint and that the existing drain pipe centres on the 4 in hole. The ABS flange is designed for 2 in pipes, so confirm pipe diameter before bonding. Ensure the subfloor is level and structurally sound to support the mortar bed and tile. The curbs are cuttable, but the tray size is fixed, so wall-to-wall clearance must match the stated dimensions.

Bundled membrane and tools simplify waterproofing

The two water-impermeable membrane sheets totalling 121.3 sq ft cover the tray and surrounding walls, removing the need to source separate roll material. Pre-formed inside and outside corners speed up corner detailing. The included trowel is sized for spreading mortar on the fluffy-textured tray surface. A valve and pipe seal plus the drainage assistant complete the drain assembly, reducing extra trips to the supply house.

Highlights

  • Pre-sloped tray directs water to the 10 cm drain
  • 38 in × 60 in EPS foam base with waterproof membrane
  • 304 stainless steel grate resists corrosion
  • Two 38 in × 4.5 in × 6 in XPS curbs cut to fit
  • Complete kit includes flange, corners, trowel and seals

Specifications

TypeOther Appliances

Questions about this item

What comes in the VEVOR VV-LYDZ-ABS3860P box and what must I buy separately?

The kit includes the 38 in × 60 in shower tray, two 38 in × 4.5 in × 6 in curbs, ABS flange, flange collar, drainage assistant, 304 stainless steel grate, trowel, four inside corners, two outside corners, two water-impermeable membranes and a valve and pipe seal. Mortar, tile and 2 in drain pipe are not included.

Which version of the VEVOR VV-LYDZ-ABS3860P should I choose for my bathroom?

This model is a single 38 in × 60 in size with a 4 in drain and 304 stainless steel grate. Choose it when your rough opening matches 38 in by 60 in and you need a 5° pre-sloped tray with cuttable XPS curbs.

What does the 38 in × 60 in tray size mean once the kit is installed?

The tray covers 965.2 mm × 1524 mm on the floor, slopes 5° from all four sides to the centred 4 in drain, and the two 38 in long curbs can be trimmed to fit the exact entry width.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.