We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

VEVOR

VEVOR VV-JH-8P 8" 3/4 HP 1800 RPM Cabbing Machine Sculpting

SKU CH-Z5Y1-HKCQR

An 8-inch cabbing machine with a 550 W motor at 1800 RPM, diamond and resin wheels, LED lamp and water system for gemstone grinding and polishing

  • TypeOther Appliances
  • Efficient grinding with 550 W motor at 1800 RPM
  • 8 in diamond and resin wheels for versatile lapidary work
  • Quiet operation at 65 dB measured at 39.4 in
  • Integrated water system and LED lamp for clean, lit workspace
  • Sturdy 79 lb frame measuring 29.2 x 13.4 x 13.0 in

8-inch 3/4 HP cabbing machine for lapidary work

The VEVOR VV-JH-8P is an 8-inch cabbing machine built for gemstone grinding and stone polishing. It runs at 1800 RPM with a 3/4 HP motor rated at 550 W. The unit suits hobbyists and small workshops shaping cabochons or similar pieces.

65 dB no-load noise at one metre

At no load the machine registers 65 dB measured at 39.4 in from the unit. The 550 W motor draws that power under full load while driving the 200 mm polishing wheel at constant speed. Net weight of 79 lbs with all accessories adds stability during operation.

Side polishing and saw blade modules included

The package adds a side polishing module and a saw blade module to the main cabbing unit. Two open-end wrenches and a user manual complete the bundle. These extras let the operator switch between grinding, polishing and cutting tasks without extra purchases.

Highlights

  • Efficient grinding with 550 W motor at 1800 RPM
  • 8 in diamond and resin wheels for versatile lapidary work
  • Quiet operation at 65 dB measured at 39.4 in
  • Integrated water system and LED lamp for clean, lit workspace
  • Sturdy 79 lb frame measuring 29.2 x 13.4 x 13.0 in

Specifications

TypeOther Appliances

Questions about this item

How do I set up the 29.2 x 13.4 x 13.0 in cabbing machine and what step is often missed?

Place the 79 lbs unit on a stable bench, connect the water supply, fit the 8 in diamond and resin wheels using the supplied open-end wrenches, and level the base so the spindle runs true — skipping the leveling step causes vibration at 1800 RPM.

Which parts of the VV-JH-8P will need replacement over time?

The 200 mm diamond and resin polishing wheels wear with use and should be swapped when cutting slows; the saw blade module and drive belts also require periodic inspection and replacement.

What limits continuous operation of the 550 W motor at 1800 RPM?

Heat buildup in the 3/4 HP motor is the first limit during sustained grinding; the integrated water system and 65 dB noise rating at 39.4 in indicate design for intermittent rather than non-stop duty.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.