We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of black carbon steel undermount drawer slides, 31.5 inch long, full extension ball bearing, 260 lb capacity

VEVOR

VEVOR Undermount Drawer Slides 32 inch 260 lbs Black 4801.800

SKU CH-3B7G-ENYXV

32-inch undermount drawer slides with full-extension ball bearings support 260 lb loads in carbon steel

  • TypeOther Appliances
  • Width5.12
  • Full-extension travel gives complete drawer access
  • 260 lb load rating supports heavy cabinet contents
  • Carbon-steel construction resists wear and corrosion
  • 32-inch length fits standard deep cabinet runs
  • Includes 24 self-tapping screws for direct installation

Undermount Drawer Slides 32 inch

These undermount drawer slides measure 31.5 inches long and use full-extension ball-bearing tracks. They are made from carbon steel with a black finish and support up to 260 lbs per pair. The kit includes one pair of slides, 24 self-tapping screws and a user manual.

Suits heavy pull-out drawers and under-stair storage

Builders fitting deep kitchen drawers, pantry units or custom under-stair cabinets will benefit from the 260 lb rating and full travel. The 5.12 inch width requires adequate side clearance, so very narrow cabinet openings should consider a slimmer profile.

Mounts to cabinet floor with included hardware

The slides attach to the cabinet bottom using the supplied ST4 screws, freeing the drawer sides for a clean look. Each slide is 2.95 inches wide and 2.17 inches high, so verify the cabinet floor depth and drawer bottom thickness before installation.

Highlights

  • Full-extension travel gives complete drawer access
  • 260 lb load rating supports heavy cabinet contents
  • Carbon-steel construction resists wear and corrosion
  • 32-inch length fits standard deep cabinet runs
  • Includes 24 self-tapping screws for direct installation

Specifications

TypeOther Appliances
Width5.12

Questions about this item

What cabinet depth is needed so the 31.5 inch slides can fully extend?

The slides are 31.5 inches long when closed, so the cabinet must be at least 31.5 inches deep to allow full extension without hitting the back wall.

Will the included 24 self-tapping screws hold these 18.52 lb slides in particle-board side panels?

The 24 ST4 self-tapping screws are designed for wood or metal framing; in particle board, pre-drill pilot holes and consider adding wood screws or dowels for a secure hold.

After mounting, how can I confirm the 260 lb rating is being met in daily use?

Load the drawer evenly up to the intended weight, then open and close it several times — smooth, quiet travel without sag or binding shows the slides are functioning within their rated capacity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.