VEVOR
VEVOR Truck Bed Storage Box 6.6 Gal Driver Side Black
Lockable, waterproof ABS wheel-well box stores 6.6 gallons and pivots 180 degrees for quick driver-side access on 2019-2020 Silverado and Sierra 1500 trucks
- Width11.61
- Lockable lid secures gear against theft
- ABS composite shell resists water dust and UV
- 180-degree pivot gives instant access without losing bed space
- Fits Silverado 1500 and Sierra 1500 2019-2020 driver side
- 6 gal capacity holds up to 75 lbs
Secure Storage for 2019-2020 Silverado & Sierra
This lockable toolbox fits the driver-side wheel well of Chevrolet Silverado 1500 and GMC Sierra 1500 models from 2019 and 2020. It provides 6.6 gallons of weatherproof space for tools and gear. The ABS and carbon-steel construction resists water, dust and UV exposure. A keyed lock secures the lid against theft.
Replaces Loose Gear or Open Bins
The box upgrades from unsecured bed storage or basic plastic totes that offer no lock or weather seal. The jump is worth it when you need to keep expensive equipment dry and locked while driving. The 180-degree pivot action lets you reach contents without climbing into the bed. Maximum load is rated at 75 lbs.
Bolt-On Install With Included Hardware
Eight ST 6.3 x 25 screws, four M8 nuts, two plastic buckles and two rubber pads come in the package. Mounting points align with the bedrail wall on the driver side. The unit weighs 11 lbs net, so one person can position it. Overtightening the screws can crack the ABS housing.
Highlights
- Lockable lid secures gear against theft
- ABS composite shell resists water dust and UV
- 180-degree pivot gives instant access without losing bed space
- Fits Silverado 1500 and Sierra 1500 2019-2020 driver side
- 6 gal capacity holds up to 75 lbs
Specifications
| Width | 11.61 |
|---|
Questions about this item
What bed-rail width and vehicle models does the 11.61 in wide box fit?
The box is 11.61 in wide and fits Chevrolet Silverado 1500 and GMC Sierra 1500 models from 2019 to 2020 on the driver side.
How do the ST 6.3 x 25 screws and M8 nuts secure the box, and what step is often missed?
Fasten the eight ST 6.3 x 25 screws with the four M8 nuts to the bedrail; the step often missed is placing the two rubber pads between the box and rail to prevent vibration.
When should the latch mechanism or rubber pads be checked or replaced?
Inspect the latch pivot and rubber pads every few months; replace pads if they crack or harden, and lubricate the latch if the 180 degree swing becomes stiff.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



