We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass CO2 regulator with three gauges and CGA320 inlet

VEVOR

VEVOR Triple Gauge CO2 Regulator CGA320 0-60 PSI

SKU CH-7R51-RT2CW

Triple-gauge CO2 regulator with CGA320 inlet adjusts output from 0 to 60 PSI and includes a check valve plus manual pressure relief for draft beer and homebrew systems

  • TypeOther Appliances
  • Width8.46
  • Adjust pressure precisely with 0-60 PSI adjustable range
  • Safety relief valve activates at 65 PSI to prevent over-pressure
  • Check valve and gaskets stop gas leaks at connections
  • Handles up to 3500 PSI inlet pressure from CO2 tank
  • CGA320 inlet fits standard CO2 cylinders for homebrew

VEVOR Triple Gauge CO2 Regulator

The VEVOR Triple Gauge CO2 Regulator connects to a standard CGA320 cylinder and delivers adjustable output from 0 to 60 PSI. It includes a built-in check valve, manual pressure relief and supplied gaskets with clamps for a leak-proof seal. The unit weighs 2.1 kg and measures 8.46 inches wide.

Suits homebrewers and draft-beer setups

Brewers who need precise carbonation control within the 0 to 60 PSI range will find the adjustable gauge and 65 PSI safety relief useful. The 8 mm outlet barb fits common beverage tubing. Installations requiring pressures above 60 PSI or a different cylinder thread should look elsewhere.

CGA320 inlet with 0-60 PSI adjustable range

The regulator accepts a maximum inlet pressure of 3500 PSI through its CGA320 connection and lets you set delivery pressure anywhere between 0 and 60 PSI. This single specification determines whether the regulator matches your cylinder and carbonation requirements.

Highlights

  • Adjust pressure precisely with 0-60 PSI adjustable range
  • Safety relief valve activates at 65 PSI to prevent over-pressure
  • Check valve and gaskets stop gas leaks at connections
  • Handles up to 3500 PSI inlet pressure from CO2 tank
  • CGA320 inlet fits standard CO2 cylinders for homebrew

Specifications

TypeOther Appliances
Width8.46

Questions about this item

What CO2 cylinder fitting do I need for the CGA320 inlet on this regulator?

The regulator uses a standard CGA320 connection, which is the common thread type for refillable CO2 cylinders used in draft beer and homebrew systems.

Will the 65 PSI relief valve protect my existing keg couplers rated for lower pressure?

The built-in pressure relief valve activates at 65 PSI, so any downstream hardware rated below that level should be protected from over-pressure events.

How can I verify the regulator is holding the set pressure after installation?

Watch the 0-60 PSI output gauge while adjusting the knob; a steady needle at your target pressure and no hiss at the check valve indicate correct operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.