We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two galvanised manganese-steel chains with grab hooks, 20 ft long, 3/8 in thick, silver finish

VEVOR

VEVOR Transport Binder Chain 7100lbs 3/8''x20' G80 2 Pack

SKU CH-PMVS-XZNNS

Two 20 ft G80 manganese-steel chains with grab hooks, each rated for 7100 lbs working load limit, galvanised for corrosion resistance and DOT certified

  • TypeOther
  • Width14.17
  • 7100 lbs working load limit secures heavy cargo
  • Grade 80 manganese steel delivers high tensile strength
  • Galvanized coating resists corrosion in harsh environments
  • DOT certified for compliant transport use
  • Two 20 ft chains included for versatile tie-down configurations

Heavy-duty transport chain kit

This two-pack supplies G80 manganese-steel binder chains rated for a 7,100 lb working load limit. Each chain measures 20 ft long by 3/8 in. diameter and features a galvanised coating for corrosion resistance. The set is DOT certified and intended for securing loads on docks, factory floors or construction sites.

7,100 lb working load limit

The single figure that determines suitability is the 7,100 lb working load limit stamped on every link. If the cargo weight exceeds this rating the chain must not be used. No other specification in the data overrides this limit.

20 ft reach per chain

At 20 ft each the chains comfortably span standard flatbed widths and allow multiple tie-down points on large equipment. They run out when the required securement length exceeds 20 ft or when the load demands a higher grade than G80.

Highlights

  • 7100 lbs working load limit secures heavy cargo
  • Grade 80 manganese steel delivers high tensile strength
  • Galvanized coating resists corrosion in harsh environments
  • DOT certified for compliant transport use
  • Two 20 ft chains included for versatile tie-down configurations

Specifications

TypeOther
Width14.17

Questions about this item

What does the 7100 lbs working load limit mean when I am securing a load?

It is the maximum tension the chain can safely handle in straight pull; do not exceed it.

What does the G80 grade and DOT certification cap in real use?

G80 sets the alloy-steel strength class and DOT certification confirms it meets transport tie-down standards.

What do I need on the vehicle or anchor point for the 3/8 inch chain and grab hooks to connect?

The grab hooks require a compatible anchor shackle, tie-down point or binder with an opening that accepts 3/8 inch chain.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.