We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black powder-coated steel winch mount plate with multiple bolt-hole patterns and included hardware

VEVOR

VEVOR Trailer Hitch Winch Mount for Polaris Ranger 2010-2021 Model 1908

SKU CH-Y3TA-XTCEE

Winch mount fits Polaris Ranger 2010-2021 models, accepting 2000-3600 lb winches with multiple bolt patterns

  • TypeOther Appliances
  • Width7.28
  • Fits Polaris Ranger models from 2010 through 2021
  • Mounts winches rated 2000 to 3600 lbs capacity
  • Powder-coated Q235 steel resists corrosion
  • Pre-drilled bolt patterns match 168 mm and 124 mm centres
  • Includes M10 and M8 hardware for direct installation

Polaris Ranger winch mount

The VEVOR mount fits Polaris Ranger models built between 2010 and 2021 and accepts winches rated from 2000 to 3600 lbs. It bolts to a standard trailer hitch receiver so owners can add pulling power without modifying the frame. The package includes all necessary Grade 8 hardware and a user manual for straightforward installation.

Q235 steel under load

The plate is cut from Q235 steel at 5 mm thickness and finished with a black powder coating that resists corrosion during extended winching sessions. Multiple bolt patterns — 168 x 76.2 mm, 124 x 76.2 mm and 79 mm spacing — distribute force evenly across the mount so the structure remains rigid when the winch is pulling at its rated capacity. The reinforced gussets prevent flex that could misalign the fairlead over time.

Receiver mounting practicality

Because the unit slides into a standard receiver tube it can be removed in seconds when the winch is not needed, leaving the hitch free for towing or accessories. The 8.29 lb weight is light enough for one person to handle yet heavy enough to stay planted under vibration. All fasteners are flanged hex or carriage bolts with locknuts and flat washers supplied, so no extra trips to the hardware store are required before the first pull.

Highlights

  • Fits Polaris Ranger models from 2010 through 2021
  • Mounts winches rated 2000 to 3600 lbs capacity
  • Powder-coated Q235 steel resists corrosion
  • Pre-drilled bolt patterns match 168 mm and 124 mm centres
  • Includes M10 and M8 hardware for direct installation

Specifications

TypeOther Appliances
Width7.28

Questions about this item

Does the 16.65 x 5.59 x 7.76 in winch mount add noticeable weight or drag to the Polaris Ranger during daily use?

The mount weighs 8.29 lbs and bolts directly to the receiver, so it adds minimal mass and no moving parts that would increase drag or heat.

Which bolts and tools must I already have to install the 1908 mount on my 2010-2021 Polaris Ranger?

The box includes 6 M10x25 flanged hex bolts, 2 M8x25 flanged hex bolts, 2 M10x35 carriage bolts, 8 M10 locknuts, 6 M10 flat washers, 2 M8 locknuts and 2 M8 flat washers; you only need standard metric sockets or wrenches.

Will the 6.60 x 3.00 in and 4.875 x 3.00 in bolt patterns on this mount fit the older 2000-3600 lb winch I already own?

Yes — the mount provides both four-hole patterns (168 x 76.2 mm and 124 x 76.2 mm) plus two 79 mm holes, covering the common footprints for winches rated 2000-3600 lbs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.