We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel automotive topside creeper with padded platform, adjustable frame and four caster wheels

VEVOR

VEVOR Topside Creeper 400 lbs 45.7-66.3 in

SKU CH-2QRA-NNXET

Adjustable-height topside creeper supports 400 lbs from 45.7 to 66.3 inches with three-angle positioning and four swivel casters

  • TypeOther Appliances
  • Width19.88
  • Work comfortably at engine height with 8-stage adjustment from 45.7 to 66.3 inches
  • Support heavy components safely with 400 lbs capacity on 3 mm Q235A steel frame
  • Move easily then lock firmly using two lockable and two 360° swivel 4-inch casters
  • Adjust working angle three ways with cushion measuring 12.4 by 18 inches
  • Stable I-shaped base spans 43.7 by 33.9 inches for secure vehicle anchoring

Adjustable-Height Topside Creeper

The VEVOR topside creeper supports up to 400 lbs on a 12.4 x 18 inch cushioned platform. Its height adjusts across eight stages from 45.7 to 66.3 inches with three angle settings, letting mechanics reach engine bays on trucks, jeeps and pickups without overstretching. Heavy-duty 3 mm Q235A steel construction and an I-shaped base keep the platform steady during high-altitude tasks.

Stability and Mobility on the Shop Floor

Two lockable swivel casters and two 360° casters with 4 inch diameter wheels allow the 58 lb frame to be rolled into position and then locked firm. The wide 33.9 x 43.7 inch footprint anchors deep under the vehicle, while high-strength bolts minimise wobble or flex on the cushioned deck. Black rust-resistant coating protects the steel during daily garage use.

Ready-to-Work Package

The box contains the single topside creeper unit — no separate tools or fasteners are required for assembly. Once unfolded, the eight height pins and three angle locks engage directly, so the mechanic can set the working height and tilt immediately. The compact 1110 x 860 x 1685 mm folded size stores easily against a wall or under a bench between jobs.

Highlights

  • Work comfortably at engine height with 8-stage adjustment from 45.7 to 66.3 inches
  • Support heavy components safely with 400 lbs capacity on 3 mm Q235A steel frame
  • Move easily then lock firmly using two lockable and two 360° swivel 4-inch casters
  • Adjust working angle three ways with cushion measuring 12.4 by 18 inches
  • Stable I-shaped base spans 43.7 by 33.9 inches for secure vehicle anchoring

Specifications

TypeOther Appliances
Width19.88

Questions about this item

How do I set the working height on the 8-stage adjustment between 45.7 and 66.3 inches?

Pull the locking pin, slide the upright tube to the desired hole, then re-insert the pin fully; the step most people miss is verifying the pin seats completely in both side plates before climbing on.

What parts will need replacement after extended shop use?

The 4-inch swivel casters and the 12.4 x 18 inch cushion cover are the wear items; casters should be inspected for flat spots and the cushion for torn vinyl every few months.

At what point does the 400 lbs capacity become the limiting factor during a long job?

The 400 lbs rating is the structural limit of the Q235A steel frame; combined technician weight plus tools must stay at or below that figure, otherwise the I-shaped base can deflect.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.