We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular EPS composite shower bench, light grey, ready to tile, 47.2 by 16 by 20 inches

VEVOR

VEVOR Tile Shower Bench 47.2x16x20" EPS Composite

SKU CH-JEZK-PT4WV

Ready-to-tile shower bench with waterproof membrane, cut-to-fit EPS composite supporting 440 lbs

  • TypeOther Appliances
  • Width17.6
  • Supports up to 440 lbs with high-density EPS composite
  • 100% waterproof three-layer membrane prevents water accumulation and mould
  • Cut-to-fit design allows sawing to custom dimensions
  • Fits standard bathtub spaces at 120 x 40 x 50 cm
  • Lightweight 6.1 kg bench installs easily with minimal effort

Ready-to-tile shower bench

The VEVOR tile shower bench is a rectangular seat built from high-density EPS composite for wet-room installations. It supports up to 440 lbs or 200 kg and arrives with a factory-bonded waterproof membrane that sheds water across the tiled surface. The unit measures 47.2 by 16 by 20 inches and fits a standard bathtub footprint.

Waterproof membrane and load rating

A three-layer membrane covers the bench so moisture stays on the tile face with no accumulation beneath the seat. The composite core remains rigid under the rated 440 lb load, preventing flex or shake during daily use. Weighing 13.4 lbs or 6.1 kg, the bench adds minimal dead weight to the shower floor structure.

Cut-to-fit sizing for custom layouts

The bench can be sawn side-to-side to reduce its 47.2 inch length without compromising the waterproof layer. Installers measure twice and trim once to match alcove or niche dimensions. The package includes one tile shower bench ready for thin-set and tile finish.

Highlights

  • Supports up to 440 lbs with high-density EPS composite
  • 100% waterproof three-layer membrane prevents water accumulation and mould
  • Cut-to-fit design allows sawing to custom dimensions
  • Fits standard bathtub spaces at 120 x 40 x 50 cm
  • Lightweight 6.1 kg bench installs easily with minimal effort

Specifications

TypeOther Appliances
Width17.6

Questions about this item

How is the 47.2 x 16 x 20 inch EPS composite bench installed and what step do people get wrong?

Place the bench on a level shower floor, apply thin-set mortar to the fleece membrane, then press tiles into place. The step often missed is letting the mortar cure fully before grouting or using the seat.

What maintenance or replacement will the waterproof membrane need later?

The three-layer membrane is bonded to the EPS core and requires no separate replacement. Routine care is limited to cleaning the tiled surface and keeping grout joints sealed.

What limit shows up first under sustained use of the 440 lb rated bench?

The 440 lb load capacity is the structural limit. Exceeding it risks permanent deformation of the EPS composite core, which cannot be repaired.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.